Question about Dynex DX-WOM20 Mouse

2 Answers

Flashing USB Just installed a new DX-WOM20 and the USB flashed every time I move the mouse or the track wheel. This drives me nuts especially in a darker room. Is there a way to stop if from flashing?

Posted by on

  • Anonymous Apr 26, 2008

    same problem i have



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 66 Answers

The flashing light on the adapter that is plugged into the USB port is normal operation of this mouse. In order to hide the light, I put electrical tape over it. There is no way to turn it off, as the flashing light is an indication that it is receiving a signal from the mouse.

Posted on May 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ya, that blue light IS bright. But I have to agree with cTech1.....
Electrical tape. Just 1 little half inch by 1 inch piece, strategically placed and trimmed with TLC, should block out the light and still not look too geeky.
I just plugged mine in 20 min. ago after finding it in the back of the file cabinet. That's why I'm here tonight, to see if it needed software, and see what other folks say. Whoo-Hoo it works !! (still blinks, but its kinda pretty after all)

Posted on Jan 28, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Mouse locks up

Please read all instructions before proceeding. If 1 does not work go to 2, then to 3.

1. Clean your mouse on all surfaces, I use a windex wipe that I have wrung out to remove some of the moisture, or you can spray a soft cloth with windex. It is surprising how dirty a mouse can get.Do not get the mouse wet. You also need to clean the surface where you use the mouse to free it of dirt and oils.

2. Go to Start>Control Panel>Mouse and check your pointer/wheel/button settings. They may be set to very slow levels. Make changes slowly, so you can see how your mouse responds.

3.Please go slowly and carefully when attempting this solution:
Start>Right click on My computer>Properties>Device Manager>Mice or pointing devices (expand the category and right click on your Dynex>Click on Update Driver>Choose look for driver in all places. This will let us know that you are using the best driver for your mouse or it will find a new one.

This site has information regarding your mouse:

Please let us know how this solution worked for you and rate my answer. Thank you!

Dec 19, 2010 | Dynex DX-WOM20 Mouse

1 Answer

Mouse Crosshair is moving by itself.

If it's wireless, have you changed te batteries? Is the optical lens clean?

Dec 19, 2010 | Dynex DX-WOM20 Mouse

1 Answer

Will not move pointer

Power down your computer, plug in original mouse, boot up. After computer boots, unplug original, and plug in your current mouse. If this does not help, call geek squad!

Aug 13, 2009 | Dynex DX-WOM20 Mouse

1 Answer

Dynex mouse for notebooks

This mouse is USB and not bluetooth. It will not work with the bluetooth wireless standard. It will only work with USB and RF. So, re-insert the base unit to the USB jack and press the button on the base, then press the button on the mouse, and it should work again.

Mar 24, 2008 | Dynex DX-WOM20 Mouse

1 Answer

USB mouse driver

Find device drivers at

Jan 11, 2008 | Dynex DX-WOM20 Mouse

1 Answer

Wireless mouse problem

This mouse needs to be synched up with its base.
Press the button on the base, then press the button on the bottom of the mouse. After this, when the light flashes on the base, it is synched and should work again.

Dec 29, 2007 | Dynex DX-WOM20 Mouse

2 Answers

Cant get Pointer to move

It's WIRELESS. The receiver is powered by USB. The mouse needs batteries. AAA in most cases! If batteries test ok in a remote control...they should have enough for mouse.

Nov 12, 2007 | Dynex DX-WOM20 Mouse

1 Answer

Pairing WOM20 with Computer

i think you may be getting wireless confused with bluetooth. Your mouse is wireless and it needs the wireless sender unit connected to a usb port, but this is not bluetooth, it picks up the wireless signal from the sender to work. You will also need to install any software that you got with the mouse (if any), as you will need to set up the button and click functions, unless it just uses the normal pointing device driver in windows.

Apr 25, 2007 | Dynex DX-WOM20 Mouse

Not finding what you are looking for?
Dynex DX-WOM20 Mouse Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2269 Answers

micky dee

Level 3 Expert

3015 Answers


Level 3 Expert

4356 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides