You accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the screen on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press this button one more time.
Was this helpful?
Yes
No
1 person thought this was helpful
Popular Solutions for Canon PowerShot A560 Digital
Downloaded files to laptop from Canon Powershot A560. fixed redeye and went to copy jpeg files to SD...
(More)
Downloaded files to laptop from Canon Powershot A560. fixed redeye and went to copy jpeg files to SD card. Keep getting the device has stopped responding or has been disconnected error. All seems to be connected and running. Any advice?
my cannon powershotA560's flash will not work. it still takes pictures but not unless the flash is...
(More)
my cannon powershotA560's flash will not work. it still takes pictures but not unless the flash is turned off. If I go to take a picture with the flash on- I hold down the button and the red light comes on like its going to take the picture but as long as i hold the button down it does not take a picture. I just want to be able to take pictures in the dark but there is no flash :(
Everything on the screen is blurry/out of focus. I dropped it and slightly separated the front/back...
(More)
Everything on the screen is blurry/out of focus. I dropped it and slightly separated the front/back sections of the camera, but slight enough that I could close it back together. Was going to try and take it apart and reclose it, but figured I would try you first. :o) Thanks!