Question about Televison & Video

1 Answer

TV picture turned green, then it went out completely

My TV went green, but picture was still on, then a few days later it went out completely. Hopefully it is a simple fix?
Please help.

Posted by on

  • 1 more comment 
  • jgrosas Dec 28, 2007

    Thank you.
    I will get the model number. Do you think its something I can fix on my own without calling someone?

  • jgrosas Dec 30, 2007

    Here is the model # KF-60WE610. I think the power supply is still good, I am able to see channel numbers when I use the remote for my Directv. Let me know what you think.

  • jgrosas Jan 03, 2008

    Where is the pic tube located?
    How can I replace it, and were can I order a replacement?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 143 Answers

If your set went all green then shut off you might have a shorted anode on the green tube this is not good news if the set went dead then it probably killed your power supply you will have to get this fixeed first then check to see if tube went bad.i need model of your set ill help yo find out k

Posted on Dec 27, 2007

  • marco amezcua
    marco amezcua Dec 30, 2007

    most of the time this is caused by bad pic tube if your set is doing fine keep an i on it see if it does it again you might have a bad pic tube with out looking at it my self this is hard to diagnose but more that likely that is your problem good luck



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

TV will not turn on

Hi, It could well be the power supply that is in the back of your set. Have a repairman check it out. It's not a do it yourself thing. Good luck.

Nov 21, 2012 | Panasonic PT-44LCX65 Television

1 Answer

I had nothing but problems with my plazma since I bought it. But a couple months ago there was too much red on the screen so I adjusted the red to almost 0 and it was OK not great picture. Then the other...

your main digital and sub digital have failed. incredibly expensive.
there is one attempt that you can make to try (by chance) to save it temporarily.
The digital and sub digital are the two boards in the center of the TV where the input jacks are located.
Carefully disassemble and remove the top layer board (sub digital)- it is connected to the board beneath (digital) by a multi pin connector about 2" in from the left hand side. This is where you problem is. Reseat that connector by removing the board then replacing it.

Apr 15, 2011 | Hitachi 42HDS69 42 in. Plasma Television

2 Answers

Picture is completely out of alignment, went to do

It means the convergence IC gave up already ang needs a replacement. And also check the 5A picofuse in the power supply.

Dec 28, 2009 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

TV wont turn on, makes buzzing noise and shuts off

I have two RCA HD52W59 TV's. I have had one for 3 years and one 4 years. The one I have had for 4 years is giving me the problem. Last week the tv turned off while watching it. It wouldnt come right back on. 10 minutes later we tried and it worked fine. the other night the kids were watching and it turned off and smelled like something burning. I tried turning it right back on and got no power at all. I tried to turn it on two days later and it made a buzzing noise and the green light went out. Never did get a picture, no powering up on the screen. Any ideas? Don't want to spend alot of money. Really loved the TV hope it isnt junk now. Better yet I hope the same thing doesnt happen to the other one I have.

Jan 22, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Screen goes completely green and ''dotty''. Sound still there.

It is dying a slow and painful *****. Time to retire the set after all those years of faithful service and move on.

Sep 09, 2017 | Hitachi 55HDT51 55 in. HD-Ready Plasma...

1 Answer

Need help repairing Mitsubishi VS 4541 rear projection TV

Visit the site linked here for more details. Repair of many popular brand devices are given.

Mar 23, 2017 | Televison & Video

1 Answer

I have audio but no video...

Deflection Board resolder all Pinns on (FBT) Flyback Transfomer.

Nov 02, 2008 | RCA D52W23 52" HDTV CRT TV

1 Answer

Philips 27PT6441/37

There is a install kit 483531057673 for this model when the set is dead. The kit will contain 7404 and the Horizontal Driver Transformer 5402 along with resistors that will limit stress on 7404 and includes complete instructions

May 03, 2008 | Philips 27PT6441 27" TV

2 Answers

Tv cuts off and green light flashes

the tv will try to reboot a few times. just let i try and eventually it will start blinking red. if you could count the red blinks then i can further assist you.

Sep 23, 2007 | Sony Grand WEGA KDF-60XS955 60" Rear...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75032 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5306 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides