Question about Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

1 Answer

No digital to reciever??

Thanks for your help. I have a Sony PS3 and a HD cable box connected to two separte HDMI inputs on my Sony 60" SXRD projection. The tv has an optical audio out and my Sony reciever has an optical audio in. I connected an optical cable from the TV to the reciever and selected the correct source for the optical cable input on the reciever. I get no audio from the reciever. The reciever does say "unlock" after I select the "opt in" selection for video 2. I connected the analog out from the TV to video 2 and get a signal. Do you have any suggestions?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers
Re: No digital to reciever??

This tv will only output the sound from a digital tv channel through the optical output when using the tv's digital tuner. So if you are connecting a DVD etc it will not output through the optical output on the tv. ONLY digital chanels through the tv's tuner will give you sound. Refer to the tv's owners manual for more info.

Posted on Jan 14, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hdmi 6 and 7 do not work

HDMI does not like connections made with units powered and or on.

Try removing power from the units connected and the set for a while, reconnect them and then connect power to see what happens.

Most Sony sets have a reset but try the suggestion above first.

Dec 03, 2012 | Sony Grand Wega 50 in. Diagonal Class Full...

7 Answers

Sky new zealand say my hd z70rx5 is unable to recieve hdcp even though the specs say the set is HDMI AND HDCP complient,they say no rear projection is able to receive hd is this true,any help i would be...

Terminals and Connections Dual HDMI digital inputs with HDCP (High Definition Content Protection) offer an uncompressed solution to the transmission and display of high definition video and audio content. All JVC HD-ILA TVs also include dual auto sensing component video inputs, assuring the best possible picture quality whether a viewer is using DTV, D-VHS or DVD, and three S-Video (two rear, one front) inputs and four AV inputs (three rear, one front).
hdmi.gif High Definition Multimedia Interface
HDMI is a new standard digital connection between A/V devices, such as a set-top box, DVD player or A/V receiver, and a digital television. HDMI offers exceptional video and audio quality with a single quick-disconnect connector. It supports multi-channel digital audio transmissions and component video color spacing for true rendering of HD video.
We carry a full line of high-performance HDMI cables. See them here...
Audio Features The JVC BBE High Definition audio system with Advanced HyperSurround and Active Hyper Bass includes two direct-drive speakers mounted underneath the screen for rich, expansive sound that fills your home theater or TV room.

Aug 06, 2008 | JVC Projection Televisions

1 Answer

Trying to use ps3, even after using hdmi cable on input 6 or 7, it says check your device output and i see green lines on my screen?

There maybe some problem with your TVs resolution. ps3 outputs full hd high resolution video(1080p) through its HDMI. May be your TV is not supporting that resolution. Connect ps3's component video out to your TV's component video input and then try. if it ask for any resolution selection. select 720p or 1080i, above that resolution your TV will not support. Your tv is hd ready one, not full hd. ps3 's HDMI out is full hd (1080p).
or try this
Connect your ps3 to any full hd tv and then goto video setup of ps3. change resolution to 1080i (down scaling ). then connect to your TV via HDMI. surly u will get the video.

Jun 09, 2011 | Sony Grand WEGA KDF55E2000 55" Projection...

1 Answer

I need to know how to switch the TV to 1080. I'm trying to use a HD box

Connect you hd cable box to the hdmi input. If you don't have an hdmi input and have a DTV input you can get an HDMI to DTV adaptor. I hope this helps.

Mar 20, 2011 | Philips 60PP9202 60" Rear Projection...

1 Answer

I just purchased a Sherwood RD 6513 reciever, I'm trying to connect a hd cable box (motorola dch 3200), dvd player (sony dvp ns710h) and a rca hd tv (l32hd41). I connected hdmi cords from both components...

Hi! I will be more than glad to assist you. I f you are going to hook up your cable box - motorola to the sherwood receiver, connect an hdmi cable to the back of the motorola cable box, there is only 1 hdmi output there, then connect the other end to the sherwood receiver on the hdmi input, then connect another hdmi cable to the hdmi output and the other end goes to your rca hd tv.

for the sony dvp, you have only one hdmi out, connect an hdmi cable to the back of the sony dvp if u have another spare. connect it to the hdmi input of the sherwood receiver. there is only 1 hdmi output at the sherwood, so u need to use a component cable to be connected at the back of the sherwood receiver component output then the other end goes to the component input of the hd tv.

if you dont have anymore hdmi cable to hook up your sony dvp, u can use component cable, the connection will goes like this, connect a component cable on the output of the sony dvp and the other end goes to the sherwood component input then connect another component cable to the component output of the sherwood and the other end goes to the rca hd tv on the component input.

I hope this will solve your concern, if you have any question, u can get in touch..

Aug 21, 2009 | Projection Televisions

1 Answer

How to connect for HD signal


Mar 07, 2009 | Sony Grand WEGA KF60XBR800 60" Rear...

1 Answer


nope.  While a true video-phile will insist that HDMI is better than the 5-wire jack, I can't tell the difference. 

Sep 19, 2008 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

HDMI inputs stopped working

I had the same problem with the HDMI connected to my HD cable box DVR. We called the cable company and he changed the box and the problem remained. He said there was something wrong with my TV.  The component (5-wire) jacks on input 5 work fine.  A few months later i got the 'green tint" problem and the tech came out to replace the whole optical box.  I asked about the HDMI problem and he said that the Sony protocol for HDMI is the problem. It will "talk" to some hardware and not others. He has not found a fix, except to use the other A/V inputs and abandon the HDMI (#7) input.

Mar 22, 2008 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer


Sorry can't help

Feb 24, 2008 | Projection Televisions

Not finding what you are looking for?
Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers


Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides