Question about Panasonic NN-T990SA Microwave Oven

1 Answer

PANASONIC NN-S933BF 1300 WATT INVERTER

WORKS FINE EXCEPT AT THE END OF THE CYCLE IT CUTS OFF AS IT SHOULD BUT WHEN YOU OPEN THE DOOR IT STARTS BACK UP. THE TURNTABLE TURNS, THE VENT FAN COMES ON AND I ASSUME THE WHOLE THING IS ON.
DISPLAY LOOKS FINE, BUT WHEN YOU OPEN THE DOOR EVERYTHING COMES ON. BAD DOOR LATCH OR INTERLOCK?

Posted by on

  • 3 more comments 
  • Anonymous Jan 01, 2008

    I have this exact same problem what is going on

  • Anonymous Jan 05, 2008

    I have the same problem. Is there a fix or is it time to buy a new one?

  • Anonymous Apr 17, 2008

    I have the same problem what should I do?

  • golfher11 Jun 29, 2008

    When I open the door the turntable turns and the fan comes on.

    Works fine when door is shut again and timer keys are pressed. Is this dangerous?

  • Anonymous Sep 18, 2008

    WORKS FINE EXCEPT AT THE END OF THE CYCLE IT CUTS OFF AS IT SHOULD BUT WHEN YOU OPEN THE DOOR IT STARTS UP.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

Yes, get that fixed. it is a danger.

Posted on Jan 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panisonic inverter microwave lights up but doesn't fully come on


How to fix microwave that counts down but does not heat or ...

? 4:51
https://www.youtube.com/watch?v=PIU1NRpeA_8
Oct 2, 2012 - Uploaded by G-Unit_YouTuber
How to fix frigidaire microwave door sensor relay switch. ... with a different part number (D3V-16G-2C25) but it doesn't look like it's stocked. ... Problem now is that when we open the door, themicrowave comes on by itself! ... I am not sure, when you hooked up the volt meter, did the lights turn on and off ...

All comments on Fixing Panasonic inverter microwaves ...

https://www.youtube.com/all_comments?v=hBJJU4ZRh7U
i have a nn-h965wfx the light comes on the countdown initiates but nothing comes .....I have a similar full size panasonic inverter microwave NN-L931BF built in ..... After putting it all back together the thing doesn't even power up the display.

Panasonic 1200W 1.2 Cu. Ft. Countertop Microwave Oven ...

www.amazon.com/Panasonic...Microwave.../B005BFZ...

Amazon.com, Inc.Ft. Countertop Microwave Oven with Inverter Technology NN-SN661S Stainless at Amazon.com. ... The microwave panini meals even end up with toasted crisp bread. ...But, right now, I find the interior light functionality just fine. .... (1) In this Panasonic, the light doesn't come on when the door is open; it only comes on when ...


Jan 05, 2016 | Microwave Ovens

1 Answer

PANASONIC Microwave Inverter #NN-SD697S. Everything works except the START button. Works sometimes, and not other times. Checked outlet, all was good.


This is either the door sensing switch (most likely) or a bad membrane switch [start switch] (that's what Panasonic calls it) on the touch pad. The contacts on the door sensing switch can be slightly contaminated and not read "zero ohms" to the control PCB. The control board thinks that the door is open and it will not allow the cook cycle to start.

Sep 11, 2013 | Panasonic NN-S251 Microwave Oven

1 Answer

Microwave will not shut off when the door is opened. Keeps operating


Hi,

The door switch has gone bad...


Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Basic
Microwave Oven Troubleshooting Tips

heatman101

Feb 11, 2011 | Panasonic NN-S933BF Microwave Oven

1 Answer

We own a Panasonic 1100 watt Inverter microwave. It has worked fine until recently - it has now started to "turn on" whenever the door is opened. Now, when you open the door the light...


HI:
You have a faulty door switch, the unit is not supposed to come on when the door is opened only the light.This unit may require servicing as the control board may also be at fault.

Dec 24, 2010 | Panasonic NN-S753 Microwave Oven

1 Answer

Runs with door open


This is a danger, cease using it immediately as scatter radiation is emiited in this situation. The door lock needs replacing to bring it back to safety regulation standard.

Take it for repair, or replace it with a new unit.

Please rate my hyelp++++Thanks for using FIXYA

Jun 30, 2010 | Panasonic NN-S751 1300 Watts Microwave...

1 Answer

NN-T774 INVERTER STOPPED WORKING AFTER 4 WEEKS


Check to make sure one of the plastic hooks on the door was not broken off. If both door hook latches are functional then the most likely cause of your problem is one of the latch switches located behind the control panel. These switches will fail if the oven user opens the door frequently BEFORE the cook cycle ends. Always push STOP/RESET before opening any microwave oven door.

Dec 30, 2009 | Panasonic Microwave Ovens

1 Answer

Turning off before finishing time time cycle


I have just had this problem where the oven will only run for 5 seconds and then turns off model #NNS561. Cant find any solution.

Jan 19, 2008 | Panasonic NN-S950BA Microwave Oven

1 Answer

Turns on with door open


It's likely that it's only the fan and light coming on when the door is open. But even so, it's not normal, and it should be fixed. It's not a reset issue. It's likely a broken door switch mount caused by a door slam or by inferior material, or a defective door switch caused by opening the door while the oven is cooking instead of hitting the "STOP" key first. You can do a Google search for my text file "doorsw.txt" which will give safety info and help in checking the door switches. Also, the plastic pieces on which the door switches are mounted should be checked, as well as the door alignment. It's usually the upper door switch or mount that causes this, but occasioanlly it's a problem on the control circuit board. Post again if more help is needed.

Oct 25, 2006 | Panasonic NN-S933BF Microwave Oven

Not finding what you are looking for?
Panasonic NN-T990SA Microwave Oven Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9100 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...