Question about Garmin StreetPilot C330 GPS Receiver

2 Answers

Attempts to install Garmin c330

Please. I entered my initial query here, tried the wizard..no results.
The garmin will not "take" the cd program, still saying that "You must connect the Garmin to the computer"...it IS connected, refers me to Fixall. Same ole same ole. Can you help?

Posted by on

  • 1 more comment 
  • brownshoe Dec 27, 2007

    Thanks for your attention,but carefully following the instructions still came up with the message to connect the 339 to the computer. Any other way to turn?

  • brownshoe Dec 27, 2007

    thanks, but i still get the message at the crucial time to "connect the 330 to the computer"..what am I doing incorrectly?

  • brownshoe Dec 27, 2007

    to szwaan: Thanks for response.
    Yes, am using a connected USB cable to install
    Driver shows up in My Documents
    Using XP
    Using supplied CD to install.
    After CD screen comes up to advise connecting 330 to computer, after signalling "next" the notice of the computer.device not being connected comes up. Thanks. Bill

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 209 Answers

Are you simply connecting your street pilot using a USB cable ?
Check if your computer recognizes it by looking in My Computer.
what system are you running ? xp ?

So, your trying to run the installation that came on the cd ?

Posted on Dec 27, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 41 Answers

There might be an problem with you street pilot, but try to download this software go to this webpage
http://www8.garmin.com/products/webupdater/howtoinstall.jsp

that will keep your unitr up to date and fix any problems you might have with it

Posted on Dec 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd rom not working


Have you tried unplug cd rom drive then reboot and plug it back in should initiate the found new hardware wizard if it does not initiate the wizard try control panel add new hardware wizard and follow the prompts you will get to the screen asking you if you have already connected the hardware click next will open a screen with all your connected devices hopefully your cd rom drive will be listed if not it could be a power\lead problem or a driver problem

you might have to physically unplug the disk drive then plug it back in this should activate the found new hardware wizard or
control panel administrive tools computer management device manger scroll to disk drives + to expand if you see your drive right click you will have options update driver ,uninstall,scan for hardware changes,properties in the properties tab you will have more options in the general tab you can troubleshoot, in the driver tab you can update driver,rollback driver,uninstall driver
hope this helps



make sure that the cd rom is getting enough consistent power test all leads that are attached to the cd rom including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or
your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this cd rom then plug them back in this will activate found new hardware wizard or
you might have to uninstall then reinstall your cd rom or uninstall the driver then reinstall for this device

control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
or it might be a registry problem
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps


Dec 03, 2010 | Dell Computers & Internet

1 Answer

Child inserted a credit card in console it will not come out by pressing eject or reset so how can I fix this????


Have you tried unplug cd\dvd drive then reboot and plug it back in should initiate the found new hardware wizard if it does not initiate the wizard try control panel add new hardware wizard and follow the prompts you will get to the screen asking you if you have already connected the hardware click next will open a screen with all your connected devices hopefully your cd\dvd drive will be listed if not it could be a power\lead problem

Dec 03, 2010 | Computers & Internet

1 Answer

When i open microsoft outlook i get a message Microsoft outlook has not been installed for this user. Please run setup to install application. please tell me how to clear this?!?!?


The microsoft outlook program was not installed during your initial installation of your microsoft office 2003 suite?

Use your initial installation CD and just follow the installation wizard.

Jun 30, 2010 | Microsoft Office Outlook 2003 for PC

1 Answer

Power Switch will not turn my Rhino 530 HCx on


When I try to turn it on it comes up with the “rino” initialization screen and buzzes/vibrates at 5 second intervals. It never goes past this screen. Occasionally, for about 1 second a small white bar will appear across the bottom saying “0%. I’ve recharged the Li battery and got the same result. I’ve tried it while connected to the charger. Same result. I’ve tried using the optional 4 AA battery pack with fresh alkaline batteries. Same result. Did the factory reboot (page/enter/power buttons). Same – except instead of a buzz/vibrate I get the tone every 5 seconds. Have to remove battery to turn off.

Contacted Garmin tech support today (10/22) - hope to hear from them soon.

Sep 09, 2009 | Garmin Rino 530 GPS Receiver

1 Answer

Lucked


If it is the garmin lock you are referring to, you need to enter the security number you programmed into in on initial set up. If you do not have or remember the code, then the GPS must be turned on in its secure site, this is where ever you were when you set up the garmin. Driveway, backyard, etc. If you don't have access to either of these then the unit has to be returned to garmin to have it unlocked.

Hope this is of some help.
Ed

Apr 22, 2009 | Garmin Nuvi 350 Car GPS Receiver

1 Answer

LG Viewty pc connection problems


I had the same problem. It was caused by the phone waiting for the date to be entered (even though it was already done). To get over the problem click on the multitask icon on the phone (top right). If anything is running other than "Home Screen" and "Menu" click on the application and close it. PC synchronisation should strat to work now.

Dec 30, 2008 | LG KU990 Viewty

3 Answers

Omg plzzzzzzz help


You text does not read true.
You are connecting to a Windows PC I assume
The camera plugs to a USB - what is special about it?
Remove all software associated with the camera.
Now plug the camera in and set it to upload.
Windows will put of the Scanner/Camera Wizard.
Let Windows do the work

Feb 11, 2008 | Cameras

1 Answer

Blue chart pacific v8.5- mapsource


Try skipping the installation wizard and use your coupon code to unlock the maps/GPS online at Garmin's website. 

Also if you downloaded the mapsource software online, the download may have been corrupted.  You may have to contact garmin tech support to try another download.

Oct 18, 2007 | Garmin GPSMAP 76 GPS Receiver

Not finding what you are looking for?
Garmin StreetPilot C330 GPS Receiver Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

yadayada
yadayada

Level 3 Expert

78238 Answers

Steve

Level 3 Expert

3289 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...