behind the refrigerator there should be a copper or plastic tube and there should be a shut off on it. Now it will be there or in the basement if you have one. Just follow the line as best as you can. If install properly there will be a shut off..
Good Luck
Thank you for the chance to help
Randy
FixYa Support Team
Was this helpful?
Yes
No
Popular Solutions for Maytag MSD2732GR Side by Side
water hookup was disconnected for months. after connection water dispenser and ice maker not...
(More)
water hookup was disconnected for months. after connection water dispenser and ice maker not working> do you have a troubleshooting guide?
water and ice side does not dispense. water pipe was broken and fixed now the dispensers are not...
(More)
water and ice side does not dispense. water pipe was broken and fixed now the dispensers are not working. the initial problem was the freezer side was leaking. now the freezer no longer leaks
leaks water from both side of the refrigerator, but not necessarily at the same time. The drain pan...
(More)
leaks water from both side of the refrigerator, but not necessarily at the same time. The drain pan is dry and the whole botom of the refrigerator appears to be dry. I have found ice in the condencer radiator, and the drain that is located just below the radiator is pluged with ice. Of corse this has lead to ice accumilation in the bottom of the freezer to the point of freezing the drawer tray in place a few times. We have deiced this area each time, this time I decided to investigate the situation further and found the radiator iced up. My question to you is, and I believe I already know, could this cause the leaking under the refrigerator?
I am using a two year old maytag side by side refrigirator with the model# MZD2667HIS. After...
(More)
I am using a two year old maytag side by side refrigirator with the model# MZD2667HIS. After changing the filter the water pressure had reduced by half. I tested the water pressure with no filter using the cap and it is three to four times faster than with the filter. I tried with a second new filter and also with the old filter and the pressure is very low. what is changing after placing the filter for the water pressure to drop? Please help me. Thanks