Printing photos I can't figure out how to print on small photo paper.Can i only use full size or can i print on 4x6 photo paper ?

You can attach photo to full size sheet (as an option),
if a document is too small it may not detect and will not
print.

1. Is this an actual HP cartridge? 2. HP Photo Smart Essentials 3.5 software, available for free from HPweb site will let you change how many photos on each page.

as i know there's no 4x6 photo paper, u just load original photo paper than print on your photo with the size that u already edit. may be you should try software that usualy use to printing postcard like this

Hi

the photo printing settings will need to be changed on the PC to either the correct paper size or change the paper size to match the size of the print out

First thing that comes to mind is that a 4x6" print could print four wallet sized photos; be shure your are not printing more than one copy.

If you are trying to print more than one,it will print the actual picure you have and leave space for the number of other nonexistent prints selected.

See page 75 of the Manual. for directions on how to set up photo printing.

If you have photoshop, you can resize your documents using the menu item, Image / Image size, (Alt + i then i again)

Set the resolution to 300, then the document size width to 6 or 10 inches.

This will guarantee that your document is full size, (though the printer should be able to resize it to fit on the page no matter what).

Give these a try. It's really a shot in the dark, but it's my best guess.

Cheers.
Richard.

If you using a mac: After choosing the Photosmart C7200 to print your file on the print preview, change PAPER SIZE to 4x6, then lower down, change from PREVIEW to PAPER TYPE/QUALITY, more options will open underneath, on SOURCE, change from MAIN TRAY to PHOTO TRAY. You should also change the PAPER TYPE to some kind of PHOTO PAPER (whichever one your using, but the standard seems to be HP ADVANCED PHOTO PAPER)

Hello

Yes, there is no 4x6 choice, you have to input costume size.
For the bord-less part, i first would recommend to use a little bigger costume size so if paper with is 20 mm and there is a boarder about 1-3 mm then input costume size 23 mm. Caution, this can cause a paper jam, because there is a solenoids, what read paper. or you can use a bigger paper and later cut off the boards. Because this printer is not capable printing board-less photos

Sorry but your question seems to be unclear.
Here are the solutions that I see:
- try fixing the orientation of your paper on the printer:
-- go to printer "properties" then select "paper" then set it to
landscape or portrait. You might just have to cut the extra
papers
- try changing the paper size on the printer "properties" if it has
no 4x6 then choose "custom size"

it's in the actual print settings. under file go to page settings, you can change it ther for as long as you need to print. Or you can apply it to keep those settings permenant. But if you choose to print a full sheet you will have to change the settings back to letter

try using a ruler to check if you have the correct paper size.
open up HP Solution Center verify the printer settings..
use borderless printing, paper size 4 x 6.