Question about Samsung (SH-M522C/BEBN) CD-RW/DVD-ROM Combo Drive
Device manager refers to contact support and help centre displaying error code as (code 10)
Code 10 means that it cannot start.. there must be some sort of missed configuration when you plugged this in...
check if that drive is in slave and if its the only drive in slave in the same IDE cable.. the IDE cable its the gray one.. some of those cables have up to two connectors..
if you have one of that cable, one plug in your main disk drive and the other in the cd drive, i bet your cd drive is in master and it takes a lot of time to get to windows..
Posted on Dec 27, 2007
Tips for a great answer:
Feb 24, 2014 | Gigabyte CD & DVD Burners
Verify you have the latest drivers installed for the CD-R or recordable drive. There are numerous driver related issues that may cause a CD-R drive or other recordable to stop reading a CD-R disc. If you are running Microsoft Windows verify your drive is properly detected and listed in Device Manage with no conflicts or errors.
If Windows Device Manager detects an error on the drive or if it has other drives listed in Device Manager with errors on them remove the device from Device Manager and reboot the computer to let Windows re-initialize the drive.
If Windows shows no errors, the above steps did not resolve the issue, or you are running a different operating system check with the drive manufacturer for updated drivers.
click start control panel administrive tools computer management device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select the no _ for your specific area make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or the drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd drive restart your computer then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device Click start control panel administrative tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer
Close all open programs
Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders
This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
After deleting the keys, close the registry editor
Reboot your computer
Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.
hope this helps
Oct 06, 2011 | Teac (DV-W58GA-PUK) Burner
Jan 26, 2011 | Rimage Amigo II (555501201) CD-R Burner
Aug 25, 2010 | Microsoft CD & DVD Burners
Sep 11, 2009 | Gateway CD & DVD Burners
Jul 17, 2009 | CD & DVD Burners
Apr 25, 2009 | NEC ND-6750A DVD RW Dual Layer Burner
Aug 24, 2008 | Teac CD-Rewritable W28E CD-RW Burner
Feb 03, 2008 | LG GSA-H42N 18x DVD RW DL IDE Drive...
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: