Question about Tomtom ONE GPS Receiver

1 Answer

Screen display screen is clear when turned on, only works when resetting.

Posted by on

  • wendy1214 Dec 27, 2007

    Same here- just out of the box for Christmas- fine if I reset each time- other than that, come up white screen!- uugghh

  • debbidoo Dec 27, 2007

    Same problem here, white screen when I turn it on, only works when I reset it. I took it back to circuit city and got another brand after reading all of the negative feedback from other buyers. I bought a megallin and am happy with it, same price and works great!


×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

I guess you have the same problem I did.... I have a TomTom One 3rd Ed., and after updating it through TomTom Home, every time I turned it on, I got a blank white screen. I would have to reset it every time before I could get it to work right. If this is the same problem...go here to download the fix.
http://www.tomtom.com/support/index.php?FID=8578&Lid=4

Posted on Feb 16, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pioneer 2700 BS has too many devices on it and the memory is full I've been told I have to shorted out reset somehow from the back how do I do that


Displaying the “Bluetooth”
screen
1 Press option key.
2 Touch , and then . The “Bluetooth” screen appears.

Clearing the Bluetooth memory
This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
CAUTION
Never turn this product off while the Bluetooth memory is
being cleared.
1 Display the “Bluetooth” screen. ? Displaying the “Bluetooth” screen on page 12
2 Touch [Bluetooth Memory Clear].
3 Touch [Clear].
The confirmation screen appears.

Sep 09, 2015 | Cell Phones

1 Answer

Both hdmi ports dont work Vizio 50" model P50HDM


Reset Vizio TV default:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Help icon and press OK. The Help menu is displayed.
3. Highlight Clear Memory (Factory Default) and press OK.
4. Enter your parental control passcode. If you have not yet set up a parental passcode, enter the default, 0000.The TV displays, "Are you sure you would like to Restore Defaults? This will erase any custom settings."
5. Highlight Yes and press OK. The TV displays "Memory is being cleared. The TV will reset shortly."
6. Wait for the TV to turn off. The TV will turn back on shortly afterward and the Setup App will begin.

Feb 12, 2014 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

Oce Varioprint 6250 is telling me I have paper in the Preheat Unit and TTF. Everything is cleared but it won't reset.


To reset turn OFF tghe copier press and hold the Utility key and turn ON the copier and wait then the display scree trouble reset.Touch the screen and turn OFF the copier,wait 1 minute and turn ON.

Feb 20, 2013 | OCE Office Equipment & Supplies

1 Answer

Reset scanner


Please try this:
If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.

Hope that helps.
Happy Scanning!!

Oct 24, 2012 | Radio Shack Pro-97 Handheld Scanner

1 Answer

Mem cleared Changed out the batteries and received a messege mem cleared and nothing will work.


Follow this steps to resolve this problem:

1. Press ON to turn calcilator on

2. Press 2nd and then press + key button. TI- 81 displays RESET menu

3. Press 2 to select the RESET, the second item in the RESET menu. The display shows the message Mem cleared. Press CLEAR to clear the screen

If you cannot see anything on the screen, you may need to adjust the graphing TI- 81 calculator contrast:

-To darken the screen, press and release 2nd key, and then press and hold up-arrow key until the display is sufficiently dark

- To lighten the screen, press and release 2nd key, and then press and hold down-arrow key until the display is sufficiently light

Aug 22, 2012 | Texas Instruments TI-81 Calculator

1 Answer

When I press ON, my calculator screen displays a couple random numbers and letters scattered across the screen, including a solid vertical line in the upper right corner. As soon as I push any key, the...


There are three possible solutions here. From what you are describing to me, you say the screen displays a couple of random numbers and letters, including a solid vertical line in the upper right corner, are scattered across the screen? Sounds like you are still in graphing mode. There is nothing wrong with your batteries and changing them won't help because I already know that you didn't change the CR Lithium Battery. This is the "memory card" for the TI-83 Plus. If you don't change that, when you insert new AAA batteries in the calculator, the memory has not been deleted. You probably don't remember, but the calculator remembers the last problem that you did, which was a graphing calculation. Try pressing the "Graph" button and the calculator will go back to function mode. If this doesn't work, try resetting all the memory.
  1. Remove a battery from the battery bay.
  2. Press and hold the CLEAR button while re-installing the battery.
  3. While still pressing the CLEAR key, press and hold down the ON button. If the home screen displays, release the keys.
  4. If the home screen is displayed, press 2nd MEMto display the memory menu.
  5. Select 7:Reset to display the "RAM ARCHIVE ALL" menu.
  6. Press the right arrow twice to display the "ALL" menu.
  7. Select 1:All Memory to display the "RESET MEMORY" menu.
  8. To proceed with the reset, select 2:Reset. The message "MEM cleared" is displayed on the home screen.
If this doesn't work, try changing the CR Lithium Battery. It is located in the battery bay at the top with the cross-head screw in it (It says BACK-UP BATTERY). It tells you what type of battery it takes and how to insert them in. I hope these possible solutions help. If all of them don't, then the only other thing I can think of is that it has some internal part alignment issues or a cold soldering iron blob, on the inside of the calculator. I saw one time on the Internet that cold soldering irons can sometimes make electronics not work properly.

Jan 14, 2011 | Texas Instruments TI-83 Plus Calculator

1 Answer

My Radioshack Pro-82 Scanner is stuck. I turned it on, held down the "lock" button until the keypad locked. The screen didn't display the "locked" symbol, but I can't use the keypad either. Even if I try...


First reset the scanner. This will not remove frequencies from memory. Turn the scanner off and then on again. Use a straightened our paper clip to gently push the "Reset" button on the side of the case (small hole). If that doesn't work, the next thing to do is to reinitilize the radio. This blows everything away so its the last resort. If you have the cable adapter and CD ROM for the radio, you may still be able to back up the scanner and reload after you do this. If not, be prepared to reprogram.

Turn the radio off and back on again. Hold down the "Tune/Clear button and again push the reset button. The display should clear. When the display returns, release the "Tune/Clear button

Now reprogram.

Aug 16, 2010 | Radio Shack Pro-82 Scanner

1 Answer

Ti-83 plus silver edition. calc won't turn on.


Hello,
Well, if screen shows the RAM CLEARED message, that means your calculator is working. Just press the [CLEAR] key, message will be erased and you are ready to crunch numbers.

Hope it helps.

Oct 09, 2009 | Texas Instruments TI-83 Plus Silver...

1 Answer

The Screen displays random lines and numbers.


Hello,
Clear the screen. Reset RAM :[2nd][MEM][7:Reset][All ram] [2:Yes] Ram cleared is displayed. [Clear] the screen.
Hope it helps.

Sep 19, 2009 | Texas Instruments Office Equipment &...

1 Answer

Black screen displaying only Garmin and a blue triangle


Hi,
to soft reset & keep data....
Slide power key to on/off, hold it for 8/10 seconds

Update from Garmin, use the web-updater. keep it updated, delete old junk and POIs.

hard reset.
Hold lower corner of screen, while turning on, keep pressing, when "clear all data appears" click yes,
sould resolve the problem

Hope this helps.
Regards.

Feb 09, 2009 | Garmin nuvi 255W GPS Receiver

Not finding what you are looking for?
Tomtom ONE GPS Receiver Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

489 Answers

k24674

Level 3 Expert

8080 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...