Question about Polycom Power/data Cable

1 Answer

Requsting for help

Which cable is used for conecting sony ericssion j 220i  with my pc

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers
Re: requsting for help - Polycom Power/data Cable Network Accessories

Visit sony ericssion website.

Posted on Dec 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi i need to know what cable i need to conect my lap top to tv ? my lap top is a dell latitude d610

Depends what your TV supports. You could do vga to hdmi cable if your tv is newer, this will only do video since vga doesn't support sound. You would need a headphone jack to whatever your tv supports for sound adapter.

Dec 29, 2011 | Network Accessories

1 Answer

I am going to connect two pc's together useing a male to male usb cable,the problem I have is that one pc is xp pro and one is windows 7 64bit Home premiem. Any help would appreciated. Regards,Gary

There are several different kinds of USB-USB cables on the market. The one used to connect two PC's is called "bridged" (or "USB networking cable"), because it has a small electronic circuit in the middle allowing the two PCs to talk to each other. There are the so-called A/A USB cables that, in spite of having two standard USB connectors at each end, don't have a bridge chip and cannot be used to connect two PCs. In fact, if you use an A/A USB cable you can burn the USB ports of your computers or even their power supplies. So, these A/A USB cables are completely useless. A/B USB cables are used to connect your computer to peripherals such as printers and scanners, so they also won't fit your needs.


May 01, 2011 | Network Accessories

2 Answers

How to use cross cable and straight cables in network

ok, i think what you mean is this.  Crossover cable is for connecting 2 computers together without the need for a router.  also called pc-to-pc.  Straight cables need the use of a router or hub to connect 2 computers together.  Hope this helps, if not let me know more info.

Mar 06, 2009 | Southwestern Bell (S60802)

2 Answers

Lan cable Setting for Switch & PC to PC LAN Connection.

If you are asking about connecting two computers together with a hub or switch, plug them into the switch/hub with standard patch cables (cat 5e or cat 6).

If you are asking about connecting two computers together directly using a LAN cable, then you will need a "Crossover" cable (cat 5e) wired specially (oranges transposed at one end for the common -B pattern) for direct LAN connection.

Jan 01, 2009 | Network Accessories

1 Answer


Well if you are asking how it should be crimped, PC to PC regularly, if it is not a smart port LAN then you have to use a cross-over cat 5 cable. but it won't really matter if you have smart ports. for the PC to switch connection, same principle applies, but if they have smart ports, that the type of LAN cables should not matter.

Hope this helps.

Jan 01, 2009 | Network Accessories

2 Answers

Normal RS -232 cable

5 4 3 2 1
9 8 7 6

1 - Not Used
2 - Transmit Data (TD)
3 - Receive Data (RD)
4 - Request to Send (RTS)
5 - Clear to Send (CTS)
6 - Grounded
7 - Signal Ground (Gnd)
8 - Data Carrier Detect (DCD)
9 - Data Terminal Ready (DTR)

Sep 30, 2008 | Network Accessories

1 Answer

Ethernet cord

Hi Dear Friend,
There can be number of reasons for this problem. To solve the problem, you can try these:

1. Check that RJ 45 connector, connected to switch/hub/pc is showing LED indication or not at the both the ends i.e pc end and at the switch/hub end.
2. Make sure switch and pc configuration should be correct and is not changed by mistake.
3. If LED indicators are not glowing any of the ends i.e PC or Switch end there might be a problem of ethernet cable, possible broken/cracked cable at some place or also possible that RJ 45 connector problem.
4. Also try the same cable to connect to different pc. Check, if it work then or not.

Hope this will solve the problem.
In case any other info is required pls. feel free to contact.


Aug 02, 2008 | Kensington Portable Ethernet Cord (33052)

2 Answers

Connecting a pc to a laptop

Have checked the IP address both should be in the same class like and

after setting the IP address
go to run type ping or 2 each other to ensure they are talking propely.

check the serviceability of crossover cable also.

Apr 19, 2008 | Cat5e 100 Foot Shielded STP 350mhz Network...

1 Answer

Xbox live

MTU maximum Transmit Unit, by default should be set to 1400, if you are going to make changes to the MTU it should be in increments of 8 IE if 1400 humdred is not working try 1392 then 1384, 1400 is the standard accepted unit size for successful DSL data upload.

May 17, 2007 | Conectl Cord Minder with Ethernet ThinCat...

Not finding what you are looking for?
Polycom Power/data Cable Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Network Accessories Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

Cindy Wells

Level 3 Expert

4719 Answers

Are you a Polycom Network Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides