At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If the sun is shining when I spray, but it gets cloudy an hour later, will the spraying still be effective? And, if I mow several hours after spraying on a sunny day, will enough have been absorbed to kill the roots?
Re: If the sun is shining when I spray, but it gets...
Sunshine speeds the effect of round-up,since it uses the plants natural growth process for chemicals to be absorbed by the plant & travel within to the roots.wait 24 hrs to mow.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I personally find the Autan very satisfying. This brand provides several kinds of products in different forms, like long lasting protection sprays, pumps and wipes, after-bite gels and creams, baby sprays and sticks, aftersun lotions etc. And they are all particularly gentle on the skin, especially the Family Care.
Here is their website: http://www.autan.com/nqcontent.cfm?a_id=1
Go to the auto parts place and ask for some rust disolving spray. Spray it on and wait a couple of hours, you might have to do this several times to get the socket loose.
Instead of spraying vinegar, i would say spray wd-40 spray.That will keep the fan and its internal assembly clean and not let the fan movement get tight and rusted.It will not allow the parts to get tight and rusted.--------
But once you spray wd-40, you have to let it remain there for 30 minutes to 1 hour, then turn the unit on .The wd-40 spray takes time to show its effect.---------
The wd-40 spray is easily available at local walmart and homedepot stores or at appliance parts repairs store.----------
This will help.Thanks.Helpmech.
Does your security light flash if you turn your key to the 'on' position? If so, this is a Passlock problem. It should restart after 10 minutes. Here`s a possible solution that has worked for me. Have a new key cut from origional key or best condition key you have. Buy some Electronic cleaner and spray lots into the lock cylinder. Then, put your key in the ignition and turn from off to on position several times (5 to 10 times quickly). Then remove your key and spray again and repeat key turning. Do this several times. I don`t recomend any spray that is oil based. I no longer have issues with my Passlock system and I have almost 500 000Kms on my Impala.
try scrapeing inside clean with a plastic putty knife of some sort and follow up with a degreaser like greased lighting or whatever you like and srub remainder off and rinse out thoroughly.
Remove the filter or if it's part of the cover forget about removing it, spray liberally with "Easy Off" oven cleaner and place in a black plastic bag in the sun, if there is no sun put it the warmest place you can find, after 24 hours spray the filter with the highest pressure water you gan get this should do the trick.
Sounds like speakers are going bad. I had a set that got wet and they worked sometimes, didn't work other times. Sounds like the bigger issue is why they're getting wet. I'd check to see if rain, etc. is getting down into the door somehow.
Have you tried pressing firmly at the bottom-center and then trying?
If you get it open, spray the lock mechanism with some durable lubricant - not WD-40 or similar since these lose most of their volume through evaporation.
×