Question about Washing Machines

1 Answer

Washing machine fjs 1025 w can you identify my problem

My zanussi washing machine has been brilliant. I am hoping there is a quick fix for my problem!! I filled the machine and went to set the temp amd wash - but the machine just keeps saying error and I cannot get anyfurther!! my friend says I need a new chip! I thought there would be a way to clear the setting and then start again. Help my family have all come home for the christmas holiday - with their washing!!
Hoping there is a quick fix, Peggy, Kent UK

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Put on the machine. Try depressing "end of cycle" button for over 5 seconds. Turn down the temperature knob first. Let me know result.

Posted on Dec 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing drum bearing on a ZANUSSI FJS 874 front loader ?


This is not a simple job, it can be fine but requires the complete disassembly of the machine to change the bearings, there are 2 bearings and a seal that require replacement, I can assist in guiding if you wish to do so, it takes around 3 hours total to strip and rebuild.

Jun 16, 2016 | Zanussi Washing Machines

1 Answer

Hi I have a zanussi Jet system FJS 1397W washing machine, the problem with it is that, the drum does not spin round any more- What is likely cause? thanks


hi check the pump first it has to drain before it spins the other cause could be the module control board the control the motor speed hope it helps

regards
shaun

May 27, 2011 | Zanussi FJS1225W Front Load Washer

1 Answer

Have just bought a zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away. Is this because it was a quick wash? V disappointed as I need a...


zANUSSI fjs 1225 W. Have run one cycle ( quick wash, 40 degrees, cotton) and the fabric conditioner was not drained away This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question. And don't forget to like us on facebook

Feb 15, 2011 | Zanussi FJS1225W Front Load Washer

2 Answers

I put on a load of washing and it stops half way through the machine flashes E20 n just stops the machine is a zanussi jetsystem zjd12191


Hello,

Error code E20 relates to the pump/filter blocked.Drain the water either manually through the filter or drain hose.Check that filter is clean and pump can turn by hand.

Hope this helps.

May 19, 2010 | Zanussi FJS1225W Front Load Washer

1 Answer

Zanussi FJS 1425W - the machine is not spinning the clothes so clothes are quite wet when they are washed so have to spin but this is also not working well - washing purchased approx 7 yrs ago -


hotpoint top loading washing machine serial number TS182924N MODEL NUMBER HNXR1060T8WW. machine won't spin and will not empty water, just a humming noise. number on scamatic diagram 175D275OGO71 MACHINE IS APROX 20 YEARS OLD

Jan 06, 2010 | Zanussi Washing Machines

1 Answer

In a Zanussi FJS 1397 W machine does the drum pully fixing bolt have a right hand or a left hand thread ie does it unscrew anti-clockwise or clockwize??


It should be a normal right hand thread, unscrew anti-clockwise.
If you are having difficulty unscrewing it, then try applying some heat to the bolt head, and spray with WD40.
Hope this helps.

Dec 15, 2009 | Zanussi FJS1225W Front Load Washer

1 Answer

I have a 6 year old Zanussi model FJS 1025 W.


hi
it looks like the electronic programmer it is not being read past that point.
suggestion get the programmer dynastic tested, some programmers can be reprogrammed or replace with anew one

Dec 21, 2017 | Zanussi FS1055W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

Brad Brown

Level 3 Expert

16994 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...