Question about Sansui HDPDP4200 42 in. HD-Ready Plasma Television
Email Id: firstname.lastname@example.org
I dissatisfied with above mentioned TV(PDP_4242) with fallowing problems:
1. Side penal working malpractice(functions are not as per shown)
2. Co lour loss(Channels becoming Black&White automatic)
3. No sound clarity in Digital telecast (Getting broken sound)
4. In standby mode the TV getting start automatically on power restore after failure.
5. I did not find AV out in TV(Even small TV also having this feature.
Beside above very poor service.
Reasone1: No body come for installation(My self installed TV after waiting one month
Reasone2: I complain tented Two months ago (complaint No:22138(Dated 22.10.2007) mentioning above problems, but so fare not rectified or responded properly
SOURCE: Sansui 42" Plasma
First we have find out if it's the set or the signal, So does this tv have snow on all inputs or just on cable? if just the cable try a another tv in its spot, if the problem continue mabe a call to the cable company is in order, I know that many cable problems come from bad conections or loosing a grounding point were the cable enters the house, Now if the problem shows up when watching a DVD or other video source it may be the tv's fault. Most likley a voltage is droping and need to be repaired perty quickly. What some people see as snow we see as a low VA voltage that is putting stress on a control board
Posted on Feb 13, 2008
1) Connect your signal source - either CABLE or ANTENNA.
2) Go into your menu and select your signal source to match.
3) SCAN in the channels. This will give you all channels available.
Your User Manual will give you all information.
If you are on cable, you may have to check with your supplier to see if they carry local stations.
Posted on Feb 23, 2009
SOURCE: i hv sansui flatron tv
If possible eaily take it straight back to the shop it came from or whatever advice the instruction book tells you depending on where in the world you are.
Posted on Sep 20, 2011
SOURCE: Repair of Power Supply Part
put your ear by the switch on the tv switch it on and off a couple of times if you hear a crackle its probable the switch its self, they always seem to go on these LCD tv i have one my self i had the same problem but i knew when i heard the crackling i new it was the switch shorting the circuit so i just took the back off the tv makng sure i didnt lose any screws located the switch cut the switch out and just wired it straight through it didnt cost nothing only electrical tap. anyway i cut the switch linked the brown wire to the blue wire twice then i places electrical tap around the wires now you will see it working. all you have to do now is just turn it off at the wall or keep on stand by.
Posted on Mar 19, 2012
Tips for a great answer:
Oct 13, 2015 | Sansui Flat Panel Televisions
Jun 03, 2015 | Sansui Flat Panel Televisions
Jan 13, 2014 | Flat Panel Televisions
Dec 03, 2013 | Flat Panel Televisions
Dec 13, 2010 | Sansui Flat Panel Televisions
Jun 02, 2009 | Fujitsu Plasmavision PDS-4242 42 in....
May 18, 2009 | Fujitsu Plasmavision PDS-4242 42 in....
May 03, 2008 | Fujitsu Plasmavision PDS-4242 42 in....
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: