Question about Sony PlayStation 2 (PS2) Console

1 Answer

Cover off on PS2

I am trying to put the cover back on my son's PS2. It is the newer model. SCPH-77001 I can't figure out how do do it. I am pretty sure I have the spring in the correct position because there is a guide for it. I don't want to force the cover on... I'm afraid I'll crack the hinges.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    Uploaded 5 video answers.

  • Expert
  • 152 Answers
Re: Cover off on PS2

Here is a video i made for some one else but at the start of the video i show the lid taking it off goes back on the same way ..tilt it to the front so the controller ports line up.

Posted on Jan 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a silver slim ps2 model number SCPH-77001. Everytime I play a ps1 game on it (which it has no problems with) it wont read my ps1 memory card. I've tried it on both slots, tried 4-5 other ps1...

You shouldnt have too. I think I know the problem. Turn on your ps2 without a game in it and it would take you to the home screen. After that go to browser with your ps1 memory card and select it. And then it should give you an option to format it. Hope this helps

Dec 06, 2012 | Video Game Consoles

1 Answer

Can't play dual layered disk in playstation slim silver

I know, this is very annoying. Mine is SCPH-79001.
Just put in the game like you would any game (that would read) and you should hear a few ticks. Turn the ps2 horizontly with the front facing you. And whenever you hear a tick, just tap it against you knee, then you should hear it spinning.

My ps2 wouldn't read GH world tour or metallica, but know it works. Hope I helped

Jan 21, 2010 | Sony PlayStation 2 (PS2) Console

1 Answer

Multi taps do'nt work with my PS2

Ok Turn On Your PS2 Make Sure You Don't have a disk inside. It should show you Browser, System Configuration, and if u press triangle it will take u to the Version menu go to console look at you console code ex. SCPH-77001. Then look at you muti tap to see if they have the same code if it does should work not the same code will not work.

Feb 16, 2009 | Sony PlayStation 2 (PS2) Console

1 Answer

Disc reads "There is no data"

For one nobody plays this game any more
I don't know how to fix it sorry''''''''''!!!!!!!!!!!!!!!!!!!
lol Ha Ha Very funny

Nov 10, 2008 | Sony PlayStation 2 (PS2) Console

2 Answers

PS2 Modded Trouble Reading DVDr's

Your DVD potentiometer pot on the back of the PS2 laser lens needs to be readjusted. Some people will try to tell you it's out of alignment but if that was the case it would not read CD's. Some people will try to tell you the laser lens is bad. If that was the case it would not read CD's. On the back of the laser lens are two potentiometer pots. In english? Two lil screws that are turnable. One controls the power of the DVD laser one controls the power of the CD laser.

That link will give you pretty lil pictures of what i'm talking about :)

In a nut shell the story goes like this folks. If your PS2 won't read certain game DVD's that are of a certain color or if it all of a sudden mysteriously fails to read games it once read but will play cd's just fine, the voltage of the laser for DVD's is not set correctly. (this does needs manual tweeking from time to time if you take your ps2 and move it around alot or if you take it over to friends houses etc etc. Basicly alot of movment in general can take this out of alignment. Even keeping the PS2 on it's side could theoreticly (just my opinion) based on gravitational pull, unbalance the potentiometer.


Step 1 identify your PS2 version:

Version 1 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U1"
Version 2 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U0"
Version 3 - SCPH-30001, 10 screws on bottom of case, serial no. starts with "U2"
Version 4 - SCPH-30000, 30001, 35001, 30002, 35002, 30003, 35003, 30004, or 35004, 8 screws on bottom of case

NOTE: Version 4 has 2 varieties of motherboard: Gap/No Gap, the difference between v4 "Gap" and v4 "No Gap" is the "Gap" is there's a spot in the center of bios chip where each side lacks solder points.

Version 5 - SCPH-30000R, 30001R, 30002R, 30003R, 30004R, or 30006R. Also, some SCPH-30000, 30001, 30002, 30003, and 30004 models have a V5/V6

NOTE: Version 5 & 6 - the difference between these two versions is one of the connectors in the corner.

Version 7 - SCPH-39000, 39001, 39002, 39003, 39004, 39008 or 37000
Version 8 - Only in Japanese consoles. SCPH-39000, or, SCPH-39006 (GH-022 BIOS 090)
Version 9 - if you have SCPH-50000, 50001, 50002, 50003, 50004, 50006, or 50007 you have a v9 or v10 board.
Version 10 - SCPH-5000x, with date code "3D" to the right and below the serial number on the back of the console. (GH-026 board)

NOTE: To know if its a v9/v10 start up PS2 with no game in it ,press triangle and check dvd driver version dvd ver 3.00 = v9 & dvd ver 3.02 = v10.

If your model # is SCPH-50000, 50001, 50002, 50003 or 50004 AND if you can find a small ''a'' under the SCPH number or have DATECODE "3C" you have a V9 PS2 main board. (GH-026 board).

If your model # is SCPH-50000, 50001, 50002, 50003 or 50004 AND if you can find DATE CODE "3D" as shown below, you have a V10 PS2 main board. (GH-026 board).

Version 12 - The new slimline PS2 consoles are referred to as PSTwo here, but elsewhere they are also known as "v12" units... their numbers are SCPH-70011/SCPH-70012, and also SCPH-70004 CB (Belgium).

Step 2 use either google or the link above. If you're using google your keyword search will be something like "ps2 v12 laser lens adjustment" *replace v12 with your ps2 model.

In either case navigate to the site and follow instructions to set the pots back to their factory default settings.

Oct 11, 2008 | Sony PlayStation 2 (PS2) Console

1 Answer

Thanks.i have another question

ok a new ps2 is so cheapthese days it is deffintly your laser that is doing this problem a new laser is roughly 85 dollars very hard to put in so a shop will do it for roughly 115 dollars so thats nearly th price of a new one

Jul 20, 2008 | Sony PlayStation 2 Slimline Console

1 Answer

PS2 Identification

This info could possibly be on the receipt or on the manual and booklets that came with it.
otherwise try contacting Playstation support, they might be able to tell you.

I emailed them and asked
I should get a response soon...

Dec 27, 2007 | Sony PlayStation® 2 Console

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles Experts


Level 3 Expert

3018 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers


Level 2 Expert

68 Answers

Are you a Sony Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides