Question about Digital Audio 840 WATTS 2, CHANNEL HIGH POWER A/B CLASS AMPLIFIER DAB2204 Car Audio Amplifier

2 Answers

DAB2204 AS SOON AS I GET IN THE CAR MY AMP DOES NOT COME ON IS GOES TO PROTECTION MODE, I HAVE TO TURN OFF THE RADIO TO GET THE AMP TO TURN ON(SOMETIMES I HAVE TO TURN OFF THE RADIO 2 OR 3 TIMES)BEFORE IT CAN GET OUT OF PROTECTION MODE, WHY IS THAT? AND WEN IT DOES TURN ON I CAN TURN MY MUSIC UP TO WHERE I USUALLY HAVE IT TO GET A GOOD HIT THEN IT GOES TO BACK TO PROTECTION ALL OVER AGAIN AND THE AMP ISNT HOT AT ALL, SOMEBODY HELP ME OUT FORREAL, I NEED MY BASS

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I know im super late to answer your problem, but for anyone else....Your wiring is probably fried, could be from too small of wires....
Another thing you could have placed the negative cord into the positive terminal and vice versa

another you could have excess copper shards along the terminals or burnt fuses in the amp or along the power cord.

there are usually tell tale signs.

Posted on Apr 25, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Try turning down the volume level on the power amp.
And see if that works.

Posted on Dec 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Protection light came on what cut off


Amp in Protection - Troubleshooting - Basic Car Audio ...

www.bcae1.com/.../troubleshootingbasicsampinprotect.htm
Some simply shut down and the power light will not illuminate when in protect mode. If the power light blinks then goes off, the amp is either going into protect ...

How do I fix my amp it keeps going into protection mode ...

? 2:00
https://www.youtube.com/watch?v=DQ1bdsm6s2c
Apr 24, 2013 - Uploaded by Nathan West
My MTX 600xd amp light won't even come on. ... Red light comes on. ... one.. and some times it goes into protection... once I turn the car off...

Jan 11, 2016 | Car Audio & Video

1 Answer

As soon as I hook the amp up it goes into protection mode. But in about 10 seconds it flashes off protection mode but them goes right back into protection mode. And it keeps doing this as long as the amp...


If you disconnect your speakers and input and the problems remain it means you've blown your end-stage and the amp needs repair.

if the problem disappears when disconnecting the speakers you may want to check if the impedance of your speakers is within tolerance of the amp.

Dec 23, 2010 | Rockford Fosgate Punch P5002 Car Audio...

3 Answers

My nitro bmw-486 amp is in protect mode how can I


Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty De .A thumbs up would be greatly appreciated if this answer is helpful to you. nitro-bmw-486-amp-in-protect-mode-lv2kkrmxrai4iihdvw4m3np2-1-0.jpg

Feb 24, 2010 | Nitro BMW-486 Car Audio Amplifier

1 Answer

My amp is a kenwood kac-9152d it goes in to protection mode soon as you hook up the power


In protection mode do you mean the light comes on and it plays music and stuff? If that's the case, that's what the amp is supposed to do. Protect itself from a power surge

Feb 21, 2010 | Kenwood KAC-9102D Car Audio Amplifier

1 Answer

I ran the amp in .5 ohms and it is only 1 ohm stable now the protect light comes on what could it b.


Blown protection circuit at best. Blown power supply and IC's at worst. Send it to a service center for an estimate, educated guess without having it on a bench in front of me $150-200 repair. To test for the possibility that it's not the amp, disconnect speakers and turn power on. If it stays clean, no"protection", check your subs for a shorted voice coil. Hope this helps.

Nov 11, 2009 | Digital Audio 840 WATTS 2, CHANNEL HIGH...

1 Answer

Kicker amp goes into protection mode as soon as i turn it on


Have you tried powering on without speakers connected? Have you tried powering on with no input? If either senerio causes the amp to NOT go into protection mode, then there is most likely a short in wiring. Use a multi meter to isolate.

Jun 11, 2009 | AudioBahn DUB Mag Audio DUB2502 Car Audio...

1 Answer

KEEPS GOING INTO PROTECTION MODE


make sure that your running heavy enough gauge wire from the battery to the amp. make sure wires to bridge the amp is correct and the av wires from the deck are the right gauge should be like 8 gauge wires.

Mar 23, 2009 | Car Audio & Video

1 Answer

Keeps going to protection mode


My ? was answererd
im going to hook up a thicker ground wire and ground it to a better place.
my positive wire is as big as i could get and my RCA cables are the good ones
this is a great place yo get information. Thanks.

Mar 23, 2009 | Pioneer DEH-P3700MP CD Player

1 Answer

My car amp wont come out of protection mode.


hey i had this happen to me, pull the deck out and move the rca cables to a different channel and see if that does not fix it. i blew out my sub pre out channel in my deck and had to use the rear pre outs. try this and let me know what you come up with. good luck

Mar 07, 2009 | American Pro Car Audio & Video

1 Answer

RODEK AMP PROTECTION


have you checked your speaker connections and any other connection for shorts or multiple ground loops. cause that will definately cause the protection mode.

Mar 03, 2009 | PPI PCX-280 Car Audio Amplifier

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Audio Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4919 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

78317 Answers

Are you a Digital Audio Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...