At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hold down the margin release key and turn on, machine will print test till turn off. Resets the TW, depress the left and right margin keys together will reset the margins to 10 and 75.
When using the margin release DON'T HOLD IT DOWN just press and release. if this dosen/t work turn off the machine and see if the carrier will move both ways relatively freely if not look fot debris and spray a little WD40 on the silver shaft that it slides on.
Turn the machine off move the carrier back & forth by hand and see if it will go all the way to both ends. If it doesn't look for debris in it's path. If it moves put some WD40 on the silver shaft that the carrier slides on. Put some WD40 on the bfront and rear carrier motot bearings, the front one can be reached from inside the T/W the rear one will require snaking the straw thru the case.
Move the printer to the margin using return button. Press the margin release button, backspace to where you want the margin to be, then press the left margin set. All should be good.
You have to hold the magic margin button down while you move the carriage all the way to the left, then release the margin button. Then repeat for thr right margin. Hold the right magic margin button down while moving the carriage all the way to the right, then release the margin button.
I can't be for sure if these are auto set margins, but it sounds like they might be. If they are, first move the carriage as far to the right as you can. Hold the Left Margin Set (not Margin Release) lever as you move the carriage all the way to the left. Release the Margin Set Button or Lever. Now hold the Right Margin Set Button or Lever (not the Margin Release), and move the carriage all the way to the right while holding the Margin Set. Once the carriage is all the way to the right, release the Margin Set. Move the carriage to the place you want to set your left margin. Hit the Left Margin Set and then release. Move the carriage to where you want to set the right margin. Hit the Right Margin Set and release it. It gets confusing, but Margin Release does not set margins. Its sole purpose is only to bypass the margins. Hope this helps.
It sounds like the left margin is set in the middle of the page, return to the stopping place, press margin release then backspace to the place where you wany the left margin and press l. margin key.
If that dosen't do it remove the batteries and unplug the machine for a minute or two all settings will go to defalt. CAUTION ALL THE MEMORY WILL BE CLEARED!!!
×