Question about GE JE1360 Microwave Oven

1 Answer

Flashing Our microwave started crackling and displayed flashes of light though still appeared to be working? What would cause this and is it safe?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 9,098 Answers

Quite often this is due to grease or food particles stuck to the inside of the oven or stuck on or behind the waveguide cover.

The waveguide cover is usually about the size of a playing card and often held in place by a plastic rivet. In some cases, it is a stirrer cover covering the top (ceiling) of the oven.

It can be fragile, and the metal edges of the oven behind it can be sharp, so be careful!

The cover and the metal behind it should be cleaned with a mild, non-ammonia cleaner.

If the cavity metal of the oven is chipped or charred, it will have to be sanded smooth and clean.

Then you can apply some high-temperature appliance paint, available from places like Wal-Mart or Lowe's.

If your waveguide cover is burned, it will need to be replaced.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

We're happy to help and we appreciate your thoughtful rating of our answer.

Posted on Feb 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Our Advantium 120 oven (model # SCA1001KSS 02, Manufactured June 2008)is not working. Began w/ time not coming on when cooking and just a little green microwave light shows while cooking.


Typical of a control microchip failure caused by a power surge. With a microwave as old as yours, it is safest to simply replace the entire oven rather than attempt to fix it, as older magnetrons are likely to fail.

May 05, 2015 | GE Profile Advantium 120 Above-the-Cooktop...

1 Answer

AEG Fault code E202 On opening the door of my microwave combi oven the interior light flashes accompanied by what sounds like a relay chattering and the display flashing between the normal display and...


I would suspect a bad door switch or door switch mount, or possibly a bad electrolytic capacitor on the control circuit board.

See:
http://www.microwavedisplay.com/safety.txt
http://www.microwavedisplay.com/disassembly.txt
http://www.microwavedisplay.com/doorsw.txt

Beyond that, I could only speculate, since I don't have experience or information on AEG products.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jan 09, 2010 | Electrolux Microwave Ovens

1 Answer

F3 flashing on display screen..no buttons work!


I have the same problem. However when I unplug the microwave from the wall outlet, let it sit for 10 seconds, then weird codes appear on the top line. Reset the clock and it shold work just fine.

zayd4@aol.com

Apr 28, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Microwave


Prototech@usa.com has links all over the internet advertising a simple fix for microwave displays. I ordered one and they never sent it. Had to file a claim with Paypal. No communication until I threatened them, then they said it's on its way. I waited another week and it sitll didn't come. After six weeks of trying to get my money back, I finally got a refund. Now I have to start all over. Any suggestions for replacing a display BESIDES this sham operation?

Aug 06, 2008 | Dacor DMT2420SS Microwave Oven

2 Answers

Bosch HES435U - Stove Keypad is Locked


Locking or Unlocking the oven control panel
1. Access Select Function Menu
2. Turn knob clockwise until Lock Keys is flashing
3.Touch Start. Key Pad locked is displayed.

4. To unlock keypads, touch cooking mode and hold for 5 seconds. Display will read unlocking key pad

5. When unlocked the clock will again appear in the display.

Apr 29, 2008 | Bosch HLK4525GB Convection/Microwave Oven

7 Answers

Microwave oven (nn-sd997s) stuck in DEMO mode


Pressing "timer/clock" button 4 times turns on and off demo mode.

Apr 26, 2008 | Microwave Ovens

Not finding what you are looking for?
GE JE1360 Microwave Oven Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

vince

Level 3 Expert

1216 Answers

D. E. Hev

Level 3 Expert

1181 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...