My Prosine 2000 quit charging. The inverter still works. Symptoms: * When on shore power (marine...
(More)
My Prosine 2000 quit charging. The inverter still works. Symptoms: * When on shore power (marine environment) there's no AC output to my breaker panel * Control panel indicates zero volts ac input to the unit from shore power (I've confirmed that this is not the case) * if I enable the inverter I get AC out to the breaker panel * the unit has been running fine in this installation for 5+ years, it's just this past year it has been acting up and finally quit all together * I've disconnected everything and hooked back up, but no help * right now the boats on the hard for the winter and wrapped, but I pulled the ps2 before putting her up. * can't get any response (email) from Xantrex tech support
hi it was working for 2 days ok i had been watching my 15 lcdtv in my truck and charging laptop i...
(More)
hi it was working for 2 days ok i had been watching my 15 lcdtv in my truck and charging laptop i did flaten batt on truck and had to jump lead start then i was traveling along while charging laptop and noticed the light had gone off on inverter and has not worked since int fuses ok and lorry elecs been tested still power in leads to lorry it is a 600w sky tronic
digitor 12 v 300watt inverter blew resister when used (on loan!) with long extension lead on a 300...
(More)
digitor 12 v 300watt inverter blew resister when used (on loan!) with long extension lead on a 300 watt appliance. resistor r21 and r20 are blown, I cant read the colour code on the burnt items in order to replace them. q. what rating is r20 and r21 on the m1111 digitor inverter? vaustin.design@gmail.com