Question about Philips Standard (CRT) Televisions

1 Answer

Magnavox RK5556 CH02 27 inch TV

We are reconnecting a DVD to the back input of the TV. Don't have original remote what channel do we have to tune to to see rear video input?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers
Re: Magnavox RK5556 CH02 27 inch TV

Just press the display button untill you see AUX in

Posted on Sep 04, 2013

6 Suggested Answers

  • 22 Answers

SOURCE: Can't access AV Channel on Sony KV-C27TD

If the TV has no RCA inputs, then there is no "AV channel" option for it on any remote, just channel selection.

The purpose of a RCA to SCART converter (aka RF modulator) is to convert one of your channels to an A/V input. They operate (standard) on either channel 3 or 4 as selected by a switch on the converter.

If your converter is unpowered, it's entirely possible that the signal coming out is not good enough to overpower your antenna signal. In this case, you may need a powered unit (such as this one which can actively "shut off" the antenna input when signal is received from the auxiliary device.

Posted on Nov 13, 2007

  • 2 Answers

SOURCE: RCA model F27252GY TV has no Video button or AUX channel for DVD

try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.


Posted on Mar 01, 2009

  • 1 Answer


During a recent move the remote was lost. I have the 6420FF in my son's room and trying to set up dvd and wi console set up, but cannot adjust tv via menu button on tv. Is there any way to set-up game system and/or dvd without remote?

Posted on Sep 06, 2010

  • 86 Answers

SOURCE: tuning problem

Your TV is set to Antenna. You need to go into the menu and change it to Cable. Then do an autoprogram.

Posted on Jan 30, 2008

  • 1 Answer

SOURCE: cannot get 27" magnavox closed caption

I called the Magnavox tech support - put the TV on channel 2,
hit the cc button repeatedly and problem solved.
thanks for contacting me.

Posted on Jun 26, 2008

  • 39 Answers


most inexpensive universal remotes will not operate input select functions. save yourself some hedaches, go to, enter yuor model# and buy an original remote, my dear! you'll thank me later! :) mch

Posted on Mar 09, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i manually program my channels on older tv without a remote

Nothing you can do without the original remote. One cannot get into the setup pages. Replacement remotes usually don't work on this point either. They are missing this special setup button. In order to watch DVD, VCR, connect them with a SCART cable. When you switch on the player, the TV will detect this and go automaticaly to this input. If connected with RCA plugs, you can choose the input with the program Up/Dwn buttons on the TV set itself, going "lower" than channel 1.

Jan 04, 2014 | Philips Magnavox 20MT133S 20" TV

1 Answer

How do i get regular tv channels no cable or direct tv. I have a 32' magnavox model #32MF338B/F7

I'm not sure about the model number of your TV, as here it is marked as both "27MS343S and 32MF338B/F7". Anyway I gies this solution as for the first denoted.
Insert antena to the antena socket at the back side of your TV marked as 75Ohms antena input.
[1] Press "Menu" button on the remote control handset to display menu on screen.
[2] Press "Vol+ or Vol--" button repetedly to hilight "TUN" [Tuner].
[3] Press "Ch+ or Ch--" button to hilight 'AUTOPROGRAM"
[4] Press "Vol+" to programming tv channels.
Tv will tune and store channels transmitted channels at that time, through entire bands, and will display the first channel receved after tuning process completed. It may take some minutes. You have to wait it to complete. After displaying the first channel, you can select your favourite channel Using CH+ or CH--" buttons. Ok.

Nov 03, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

I am trying to sync my sansui tv with my magnavox dvd/vcr combo. I can't figure out what channel the sansui needs to be on to play a dvd. The input button on remote is not working.

Tries buy a new remote this website have a exact or very close to the Original remotes.1-800-Remotes Factory Original.Tries channnel 3 only or 4 only functional for video equipments.

Sep 29, 2009 | Sansui DTV2760 27" TV

1 Answer


most inexpensive universal remotes will not operate input select functions. save yourself some hedaches, go to, enter yuor model# and buy an original remote, my dear! you'll thank me later! :) mch

Mar 09, 2009 | Philips Magnavox MS2530C 25" TV

5 Answers

Missing remote control for c1310atv disney pixar cars tv/vhs

Philips Magnavox makes the remote. Not sure about the model #, but you can get to the audio/video or DVD by scrolling through using the channel buttons on the unit itself. I have also been successful with a universal remote with the exception the channel up and down would not fuction correctly, but direct entry did, as well as the source select. Hope this helps.

Oct 25, 2008 | Disney DTD1363-CAR 13" TV/DVD

1 Answer

Magnavox Model # RK 5530 AK02 TV

Can you get to inputs on your tv ? I would use these inputs rather than channel 3 because you'll get a better picture using the inputs rather than the tuner. They are in the back Yellow for video and red and white for audio. But without the remote you can go into the menu to see if you can manuel program your channels but most of these sets you can't do that . might have your remote should you need one . Good luck

Mar 01, 2008 | Standard (CRT) Televisions

2 Answers

Zenith TV

have u tried using a universal remote and programming it for your tv? sometimes universal remotes can break a code that a common tv remote cant, hope this helps, just a suggestion!!!!

Dec 28, 2007 | Standard (CRT) Televisions

2 Answers

AV channel on magnavox tv

This worked for my 20" Philips Magnavox 20MT4405/17 TV, it might work for you as well. DISCLAIMER: This is just a solution that I pieced together information from various internet sources, as I could not find a free copy of the service manual to verify this. Furthermore, I am not a technician of any sort.

Enter your TV's service menu by pressing this sequence of buttons on your remote while the TV is on:
062596 Menu

Use the arrows on your remote to scroll down to "Options", push the right arrow to enter options.

Change the 7 options parameters in order to (write down the original values in case this does not solve):
OP1: 065
OP2: 215
OP3: 065
OP4: 162
OP5: 204
OP6: 201
OP7: 000

You need to enter all 3 digits for every number, even if there are zeroes. You use the numbers on the remote to do this.

Turn the TV off with the built in power button.

Unplug the TV for 10 seconds.

Plug the TV back in, turn it back on.

If this does not solve your problem, reset the values of the options in the service menu to the values you wrote down earlier because you have a different problem than what this fix works for.

Nov 05, 2007 | Philips Magnavox 13MT143S 13" TV

1 Answer

Connecting my tv and vcr so i can use the vcr remote control

You can always push "03" on a universal remote programmed to work your TV. A better solution is to connect the devices properly. You shouldn't use the tuner inputs for a VCR/DVD player, or you will get a poorer picture and no stereo sound. See the instruction manual for your player and TV. Use a stereo audio/video cable to connect them and select the proper input. The instructions will hopefully clarify this.

Oct 16, 2007 | Philips Magnavox 27MS343S 27" TV

10 Answers

No Video

From the manual (search Google for CM27101S): Normally, your TV displays the signal coming through the antenna terminal. However, If you?ve connected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ? TV ? input to the ? Line1, Line2 ? Input, as follows: 1 With the TV on, press the MENU button twice, then ? Set-Up ? menu will appear. 2 Use the WCHVbuttons to select ? Input ?. 3 Press the CVOLB buttons to change from ? TV ? to ? Line1, Line 2 ?. 4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.

Aug 07, 2006 | RCA F27676BC TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

656 Answers

Jim Evans

Level 2 Expert

186 Answers


Level 3 Expert

485 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides