Question about Samsung PPM50H2 50 in. Plasma Television

1 Answer

Samsung PPM50H3 Monitor will power up with sound but no picture. Display went blank while watching a movie on Satellite TV. All components were connected properly. Thanks!

Posted by on

  • 2 more comments 
  • Anonymous Feb 17, 2008

    Same story. All audio is fine, but no picture. Started a few weeks ago with the top 1/3 of the screen being "snowy" or "pixilated", but would go away after a few minutes.

  • daremetwo22 Oct 01, 2008

    while watching tv samsung screen goes black tv was 2 weeks old samsung said i will geta new tv there full of it 6 months later still no tv and supposivly no record found?



    turn tv off then back on and it works,



    been reapired many times new power supply , new boards still get black screen



    i have 2 lg , and a panasonic with no issue Samsung is ****



    3 samsung plasma all duds, 1 samsung lcd dud, 2 rear projection dud after 3 yrs???



    if anyone has fix ups for the black screen while watching tv please help



    daremetwo22@hotmail.com

  • promero76 Apr 11, 2009

    Same problem, it just goes blank and the audio works fine.

  • Anonymous Mar 24, 2014

    everything seems to be working except the picture display. Is there a lamp in this tv even though it is LED? What seems to be the problem with the tv?

×

Ad

1 Answer

This is indication of protecion short in a integrated circuit to take a few seconds to sense. Please send to recommended service center.

Posted on May 18, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have an LG 47LN522-UB LED TV that stopped working after three years and need help diagnosing a problem with it.


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Apr 26, 2017 | LG Televison & Video

1 Answer

60 inch Samsung led smart tv model number un608h6203afxza,about 8 months ago it just pixeled out, today was watching a movie and picture just went blank? The first issue unplugged it ,and it worked


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Mar 12, 2017 | Samsung Televison & Video

2 Answers

What do you think is wrong with my television, it has sound but no picture. How can I fix the problem?


Hi there
I would go to menu on the remote , from there to picture go down the list, if you do not find anything there to help you. Go to Support and to the E manual .
26053790-x3zeawgeewbvgdzeyuixqaom-4-0.jpeg Kolbrun

Jan 14, 2016 | Samsung LN52C530 52" LCD TV

3 Answers

Samsung flat screen tv no picture sound only, I have checked all connections and remote still same problem.


The T con board is faulty. It is the board with flat ribbon cables going to the bottom of the screen. It is not hard to replace this board. You can get one from here:
TV Parts Universal TV Stands DLP Chips ShopJimmy

Jan 01, 2016 | Samsung Televison & Video

1 Answer

I have Samsung 46" rear projector TV the TV just went blank


TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA
May 8, 2014 - Uploaded by ShopJimmy.com
TV Repair Help for a TV With a Black No Image on the Screen ... the show I'm watching and then it turns ...

LED TV Repair Main Board Overview Blank Screen-TV Has ...

? 2:57
https://www.youtube.com/watch?v=-TU2KSuect4
Mar 4, 2014 - Uploaded by ShopJimmy.com
i have SAMSUNG led tv with NO picture and there is back light and sound OK, ... Apparently the TV was on ...

Dec 15, 2015 | Samsung Televison & Video

3 Answers

47LG70 - PICTURE WENT OUT. STILL HAVE SOUND. HEARD A POPPING NOISE WHEN PICTURE WENT. TV IS ONLY 1 1/2 YEARS OLD. ANY IDEAS WHAT MAY OF HAPPENED.


I have had the same problem off and on with my 47LG70 for months. When the "popping" noise happens, the blue light in the corner stays on, so I know the tv is still on (sometimes I still have sound, sometimes I don't). Sometimes the screen goes black, but other times it is blue. If I turn the tv off then on again, it might stay on for seconds, minutes or hours. It's been very frustrating.

This seemed to happen right after I got my new Comcast box, which came with an HDMI 1.3 cable. I read somewhere online that this tv might not be compatible with that cable, so I unplugged it and am using component cables again. I just did this today, so I don't know if it will work, but so far the tv has been on for 30 minutes with no problems.

I'm pretty ignorant about HDMI compared to component cables. I imagine I will not get as good a picture with the component cables, but I am willing to sacrifice quality if I can just get the darn thing to work. Mine is also only 18 months old.

Hope this helps. If it doesn't, maybe someone else out there can help us both.

Sep 21, 2010 | LG 47LG70 42 in. LCD TV

2 Answers

After about ten minutes the picture goes blank but


It sounds like the main board may have went on the TV. It should be not that costly to replace

Sep 26, 2009 | Samsung LE40R74BDX 40 in. LCD Television

2 Answers

Panaonic Home Theatre DVD system only plays movies inblack white


Check the region and picture settings on the home theatre's dvd player, it could be set to put out a component signal, or it could be set to a PAL region rather than NTSC

Jul 06, 2009 | Audio Players & Recorders

2 Answers

When I turn on the tv it automatically turns off itself


Back again. It appears that the key is the order in which you connect things and switch the TV on or off. It took some experimenting to get to what's reliable. I'll spare you the details and confine myself to what works.
1. Start with the monitor cable disconnected at the laptop.
2. Turn on the TV with the source set to your regular satellite (or cable) signal.
3. With the laptop on, plug the monitor cable into it.
4. Switch the source (at the TV) to receive the VGA signal (from the laptop).
Voila!
To turn off, reverse the procedure.

Mar 27, 2009 | Televison & Video

Not finding what you are looking for?
Samsung PPM50H2 50 in. Plasma Television Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75756 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...