Question about Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television

1 Answer

Phillips 60 inch HD rear projection? Convergence!

Ok! I,ll try to explain clearly.
First the tv stopped coming on.Green power light on but no picture.So I had the board replaced for that. Picture back working. But What I call a 3 inch bow at bottom of screen.red yellow blue seperatly bowing together. I beleive it was the convergence board replaced next. Guy tried to set convergence but quit .said he couldn,t do it. Did not know what happened to it after he replaced board early on. Well! Hope somebody might have an idea! Thanks Alot, J.L.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Posted on Jan 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Screen wont turn on. Replaces tcon. No Power going to tcon.


Hi Nick, Please trace the 12V line. Most probably it is coming from the main board.

Dec 10, 2016 | Sony Televison & Video

1 Answer

Flat screen tv


Open internal fuse or power supply failure

Aug 30, 2016 | Televison & Video

1 Answer

The green light comes on but the tv dont come on


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/

Dec 30, 2015 | Proview Televison & Video

1 Answer

My RCA L42WD22 flat screen will not power on after being turned off for an hour. When I tried to power it on the green light comes on, and I have a flash of a picture, then a black/blank screen & a...


Take the tv apart.The tv power supply board,that the board,have power a/c cord plug into it.That the power supply board,check component parts like capacitors,see if it leaking gases,these capacitors are dead.Capacitors they'll alway bulges up on it tops or puff up on it tops.Have tools like soldering iron and solders?Know basic electronic and soldering?Replaced these dead capacitors will get power to ur tv back.Or tries websites like Shopjkimmy.com to buy a whole refurbish power supply board for the replacement.

Jun 15, 2011 | RCA L42WD22 42 in. LCD Television

3 Answers

I have a Sharp LCD TV that is not quite 2 years old. Last night, while watching, the set turned itself off and the green power button kept flashing. I read that someone else had this problem, and tried the...


Hi


Thanks for using FixYa. As you have already tried the reset procedure so to check what has gone bad you’ll have to open the back of the unit and check the backlight inverter board. The inverter is the power supply source for the backlights. If that’s the issue then it’s always better to replace the inverter board completely just to avoid any future issues. If not then check the power supply board however, it seems to be the inverter board as the sound is still working fine.Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 02, 2010 | Televison & Video

3 Answers

The TV (Dynex DX-LCD32) will not come on. The


I have a DX LVD33 power light is red and no picture or sound screen is black. Please advise.

Dec 25, 2009 | Dynex 32 in. LCD Flat-Panel HDTV

2 Answers

Picture & sound go on & off every sec, red light blinks 5 times


helloFive blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

shaun

Oct 25, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

Sony grand wega turns off & o ever 30sec flashes green light


it's a power failure.try to replace the regulator in power supply board.

Sep 04, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

No Picture & No sound. Red LED, Green LED, Red LED.


If the power supply outputs are good! Then I would say the back light inverter is bad! If the screen stays black and does not come on.

Jan 14, 2009 | Akai LCT2660 26 in. HD-Ready LCD...

Not finding what you are looking for?
Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...