Question about GE Kitchen Ranges

Open Question

Need Schematic for GE Elec Overn model 1-dp36G-H3-bg


Our 20 year old GE elec oven still works great. The timer went out some time ago but just the other day it started buzzing on its own and we couldn't get it to stop. So, using my extensive intellect I removed the metal cover to access the wiring going into the clock unit and disconnected everything. Well, needless to say the burners now don't work and I made no notes of where the various wires I pulled need to connect!! I there someplace I can go to see the wiring? All of the conncectors are intact, so it is just a matter of slipping the appropriate wires back into place. Can you help?

Thanks - Rob

Posted by on

2 Suggested Answers

SOURCE: Clock on a GE electric range is buzzing - how to disconnect it

Turn off power to range first!!!

You'll have to remove the back of the panel in which the clock is installed to access the back of the clock. There will be two wires attached to the clock. Just pulling one of these wires off will stop the clock.

I would suggest, however, that you pull both wires off, put electrical tape on the ends of the connectors, and tuck them out of the way somewhere around the clock.

Posted on May 03, 2009

  • 1 Answer

SOURCE: frigidaire compact 30 elec. stove.

My frigidaire compact 30 just bit the dust and I removed it finding the wiring diagram on the back. do you still need/want this?

Posted on Jul 04, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

How do I turn the timer off on my old Creda Hallmark oven?

I recommend replacing the entire unit. 20 years is well past the operational life cycle of the oven. You deserve a new unit for sticking with it for so long. Besides, the new ones are more energy efficient.

Jul 28, 2014 | Creda Kitchen Ranges

1 Answer

We have a GE profile spectra (approx 8 years old), the oven lights with a boom the first use of the day. seems to light ok each time after. just started doing it a couple of days ago. any info would be...

That sound very typical of a weak oven igniter. When its cold it takes so long to get to needs to be to ignite gas so gas collects in oven chamber before igniting then as its on it get hot a bit sooner. Eventually the igniter will weaken even more to the point will it will not ignite the gas at any time, replacing it now will prevent that. The part number for the igniter is WB13K21 it could be purchased at your local appliance parts store or online at;

To replace the igniter;
remove oven racks
remove oven door by locking hinges into place and lifting off of oven(if unable to figure how to lock hinges this step can be ommitted but it much easier with door out of the way)
remove oven floor
unscrew igniter from burner bar
disconnect wiring,which will be under storage drawer
pull out old igniter
run new igniter wiring down below to storage drawer area
screw igniter to burner bar
connect wiring
Test to see if works without booms when cold
reinstall oven floor
reinstall door
reinstall racks

I hope i have been able to help you fix your oven,

Aug 21, 2011 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

CGS980SEM1SS GE Cafe gas range which is 2 yrs 2 mths old. Oven shuts off after 5 mins, 10 mins, 20 mins...and at any temperature. All control panel functions cease to work, and most of the times the stove...


The issue can either be a bad electronic control/clock assembly or the oven temperature sensor (probe) has gone bad. To solve this issue start by checking the oven temp. sensor for 1100 ohms, if the rating is more then 1120 ohms then it should be replaced however, if it reads between 1080-1120 ohm then check the control and door switch and replace the part that is bad. You can also check the wire harness from the control to the electronic board. Hope this helps...


Feb 11, 2011 | GE Cafe CGS980S Kitchen Range

1 Answer

Electrical panel went blank. Hence can't operate the oven. Stove works fine.

Hi. Interesting. My Figidaire Gallery Professional gas stainless went blank 2 days ago. Model FGF379WECS. So I'm googling...

Your Service Manual is located at (document #2 in link):

Part Number
Description :
Clock/Timer, electronic, w/mini oven, ES510


May 15, 2010 | Frigidaire Gallery GLEFM397DS Electric...

1 Answer

GE XL44 oven does not heat

12 years old? If it is a gas rnge yo need to get a gas technician out to fix it. I would probably say it s time for a new one. Hers is a couple of things to think of when getting a new stove. 1) Everyone wants a self clean. But 90% never self clean. can save up to $200 w/o that option. 2) 80% off people buy a stovebased on looks. A stove may not be pretty but work just as good as one that is.

Feb 16, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Don't know how to start the self cleaning oven. Please advise.

Most service techs will advise you not to use self clean features on a oven due to excessive parts failures from the extreme heat.

Feb 04, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Oven not working after controller beeping

if ihe oven is not working. ck ihe igeniter in side ihe oven it trun red hot when you trun the oven on

Dec 31, 2007 | GE JGBP33 Gas Kitchen Range

1 Answer

Claibrating the temperature of a GE gas oven

First of all, do not use the oven thermometers from a grocery store. they can be off by 20 degrees or more. These directions may help you for electronically controlled ovens. The older manually controlled ovens have a small screw head in the center of the oven temperature knob that can be adjusted in usually 10 degree increments.

To Adjust the Thermostat
Touch the Bake and Broil Hi/Lo pads
at the same time for 3 seconds until the
display shows SF.
Touch the Bake pad. A two digit number
shows in the display.
Touch Bake once to decrease (-)
the oven temperature, or twice to
increase (+).
The oven temperature can be adjusted
up as much as 35°F. or down as much
as 35°F. Touch the number pads the
same way you read them. For example,
to change the oven temperature 15°F,
touch 1 and 5.
When you have made the adjustment,
touch the Start pad to go back to the
time of day display. Use your oven as
you would normally.
NOTE: The thermostat adjustment for Baking
will also affect Convection Baking or Convection Roasting.

Nov 22, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides