I have a belkin G router that my computer will not recognize for some reason. It recognizes every other network in the neighborhood except mine. There is no security or password set, and my wifes computer recognizes it perfectly. please help

https://www.belkin.com/us/support-article?articleNum=8132

Go to my computer control panel network connections and see if the setup for networking is correct DHCP should work most of the time. Check the device manager and see if your nic is properly recognized. If not you might need to install drivers for the card.

mycomputer - control panel

mycomputer - view system information - hardware - device manager

Also, sign onto your router and see if the router recognizes the computer.

It should tell you how to do this in the routers manual.

click start control panel administrive tools,computer management,device manager scroll down network adapters + expand Ethernet driver right click update driver,disable,uninstall also select properties general you can trobleshoot or driver to update,rollback or uninstall
a yellow? question mark means you need to install/update driver right click to install driver
hope this helps

1. Please check your computer's IP address should be autamatic.

2. Please do not connect your cable from your computer to Belkin's Internet port

3. Please connect your cable between your computer to belkin router's 1,2,3 or 4 number's port

4. Please check you cable should be not cross cable.

You cannot install the Belkin CD on PS3, you can access your external HDD only on wired or wireless devices that has operating systems like Windows or MAC. With PS3, we can play on the network or stream videos.

I had this same issue. Found it to be a sequencing issue. Plug the USB into the router with the power off to the HDD. Power on the HDD and you should be able to get to it fine. Also make sure you have the latest firmware on the router.

I just checked this with the folks at Belkin customer support - they do not support setups with PS3 - I am also desperately trying to get this to work.

Any ideas?

I could not find the F5D8635 model but here is the Firmware update page for the N1 Vision Router.
Try updating your firmware.

Hi, did you provide the network key/password when you setup the wireless conection on your computer? Is it detecting your wireless router (you should see your SSID or network name) when you click on your wireless icon (in the taskbar) and chose "show wireless connections". If you can acess to your router via it's configuration page(type the router's default IP address in your browser) you can go check the settings and change the key/passphrase if you dont remember it. If all of this is not working, you can also start from stratch. Reset the router to factory settings (check your manual) then reconfigure it the way you want, put the new infos in your wireless network connections properties and try again. let me know with more specific details if you still cant do it

need isp number