Question about Network & Wireless Adapters
I get to connect briefly to the orange wireless router but have to keep starting the zero configuration utility. I think it might be something to do with the toshiba utility contending with the microsoft wireless utility but don't know how to stop it.
appreciate any help you can offer
Restart the computer. WZC will start automatically as long as Windows assigned to configure wireless Network
Posted on Dec 29, 2007
Tips for a great answer:
Jan 30, 2013 | Linksys Dual-Band Wireless A+G PCI Adapter...
on Mar 18, 2010 | Network & Wireless Adapters
Jan 25, 2013 | Linksys Instant Wireless WMP11 802.11b
Dec 27, 2012 | Belkin Wireless G USB Network Adapter -...
The orange "i" means that the Ethernet cable connection to the modem has been detected.
The light should be blinking green for Internet connectivity.
I advise you to reset the router:
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 5 seconds, until the Power light begins to blink .
2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.
If resetting the router does not correct the issue, you should call your ISP (Internet Provider) and check if they are having a problem.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
May 23, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...
Mar 08, 2010 | Network & Wireless Adapters
Oct 06, 2009 | HP (319468-002) (319468002) 802.11b...
Aug 31, 2009 | NetGear : WG111 54 Mbps Wireless USB 2.0...
Oct 13, 2007 | Powerline Ethernet Network Adapter
907 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: