Question about Sony KV-32FS10 32" TV

1 Answer

Sony KV-24fs100 -Blinking front panel LEDS when attempting power up

Hello,

Having a little problem with my Sony KV-24FS100 .When powering on the set I only get a click and flashing LED on the front panel. There is no power to set.No raster, no sound. I have checked the internal fuse and it is good.So I know there is another issue.I have three questions:

1. What do the number of flashes indicate.

2. Can you give me idea where to find the problem.

3. Whatever the solution might be, will it be a design improvement to prevent the problem from re-occurring.

My serial number 4055947 Built August 2002 Chassis BA6

Would appreciate whatever help I could get. I want to fix this right the first time.

Elbert

Posted by on

  • enegma Dec 26, 2007

    There are 3 blinks

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 231 Answers

Count the number of RED blinks..You should have a pause inbetween counts.then count starts from 1..let me know

Posted on Dec 26, 2007

  • crispin melchor Dec 26, 2007

    Led blinks

    2x= HV OVP = Possible bad flyback part#145333611

    2x=(B+) OCP= HORIZONTAL OUT Q505 OR Q506 or bad IC 1751 on CV board

    4x=I protect= bad IC 545

    5X= BAD IC545 OR IC001

  • crispin melchor Dec 26, 2007

    have you unplugged unit from wall for about 10 sec to reset ?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony tv black screen


Repairing a TV set is actually a skilled work. If you're not sound in electronics, make sure, that you can't do it; especially to Sony sets. If the set switches ON; with audio output OK, and there is no Video, surely the fault should be with its horizontal scan output section circuit. Check that circuit for fault. To get more details, http://electronicshelponline.blogspot.com/

Nov 22, 2013 | Sony FD Trinitron WEGA KV-24FS100 24" TV

1 Answer

KV-24FS100 TV shutting off


How many times the standby light flashes in between switch ON and going OFF?
For more details about this fault, visit this site, and call older posts.

Type in this link address, [without brackets] either to Google Search Box or into the Address Bar to your browser and press Enter. It has all the details about blinking codes of Sony Sets.
electronicshelponline(.)blogspot(.)com


In name [Electro-Help]

Apr 16, 2012 | Sony FD Trinitron KV-32HV600 32" TV

1 Answer

My remote worked fine, but suddenly won't work at all. TV is older Sony Wega 24" Trinitron (KV-24FS100). The satellite remote will change the channels, cause it's using the box, but it won't control...


Could be the IR receiver in the TV.
Make sure nothing is in front of the TV that would block the IR from receiving commands from the remote, I've seen customers put VHS tapes on the front of their TV that caused the remote to not to work.

Good luck
N Sabre

Nov 09, 2009 | Sony FD Trinitron WEGA KV-24FS100 24" TV

1 Answer

TV Doesnt work


replace the flyback transformer.

Mar 01, 2009 | Sony FD Trinitron WEGA KV-24FS100 24" TV

1 Answer

Blinking Sony Trinitron with no picture or sound


you have a drive ic problem. ic 600, r640 and modification needs to be performed. Take to a Sony servicer. Est.$150 parts and labor

Dec 30, 2008 | Sony FD Trinitron WEGA KV-24FS100 24" TV

1 Answer

Sony Trinitron KV-24FS100 red light flashes 4 times


your tv had a problem.if you have a knowledge in electronics, check or replace the horizontal transistor beside the plyback. it is a black square parts with 3 pins.

Jul 03, 2008 | Sony FD Trinitron WEGA KV-24FS100 24" TV

1 Answer

SONY WEGA KV27FS120 WON'T TURN ON, LED BLINKS A FEW TIMES


YOU HAVE A PROBLEM WITH THE DRIVE IC OR HORIZONTAL CIRCUIT. TAKE IT TO AUTHORIZED SONY SERVICER.




EST $150.00 PARTS AND LABOR

Nov 25, 2007 | Sony FD Trinitron WEGA KV-24FS100 24" TV

1 Answer

Is my tv dead?


no not at all , may be lot or h.o. transitror ar circuit dry solder, if any problem led red indicator blinks continuesly.. please chek all h.o section...and smps...

Sep 28, 2007 | Sony FD Trinitron WEGA KV-24FS100 24" TV

Not finding what you are looking for?
Sony KV-32FS10 32" TV Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...