Question about ViewSonic Optiquest Z70 17 in.CRT Conventional Monitor
My monitor optiquest z70(old) will just displaya viewmeter and a message stating no signal.i left it on over the weekend and the room in my office was very cold.
just check the power cable from the monitor is connected correctly and plug from cpu to monitor is connected properly be sure is there an loose contact... if it doesnt works means then give reset button in monitor... check the power and frequency control properties in bios .... may be properties is user define or is in maximum saving mode just change it to mininmum saving mode ...it will work...
Posted on Feb 06, 2008
Tips for a great answer:
Jun 20, 2012 | ViewSonic VG1921wm 19" Monitor
Jun 09, 2010 | Optiquest 17" DPT Q71-5 Monitor
Apr 12, 2010 | ViewSonic Optiquest Q19wb LCD Monitor
May 27, 2009 | ViewSonic Optiquest Q19wb LCD Monitor
May 21, 2009 | ViewSonic OptiQuest Monitor
Apr 02, 2009 | ViewSonic OptiQuest Monitor
Feb 06, 2008 | ViewSonic VA720 17" LCD Flat Panel Monitor
Feb 04, 2008 | ViewSonic VA720 17" LCD Flat Panel Monitor
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: