-   Hi, I'm having exactly the same problem with the delay and door lock light flashing rapidly when it's coming up to a spin - any further ideas?
-   Villa Fan
Feb 19, 2008
-   MY MACHINE WASHING AS A PROBLEM IT WASHES OK WHEN IT HAS FINISHED THE WASH AND GOES ONTO SPIN THE TIME DELAY LIGHT FLASH AND THE THE DOOR LOCK LIGHT
(THE LIGHT WITH THE PICTURE OF A KEY NEXT TO IT).THEN THE MACHINE JUST SIT THERE NOT DOING AHYTHING
HOPE YOU CAN HELP
MANY THANKS
DAVE-   DAVE02
Plug off the wall. Open up behind the machine. Check to see if any wires loose. See that the wires from the control panel to the motor are plugged in tight. Vibration from the machine could loosen the wires and give the display wrong readings, or disrupt the run.
Was this helpful?
Yes
No
Popular Solutions for Ariston Technologies AWD121WH
hi i have a ariston boiler he mffi 24 microgenius the problem is that i cant seem to set the wired...
(More)
hi i have a ariston boiler he mffi 24 microgenius the problem is that i cant seem to set the wired temperature gauge it works but i cant setup desired temperature it switches the boiler on but the boiler runs in high temperature around 80 mark.
My Ariston Margherita AWD 12 washer/dryer will light up as though a dryer programme has been...
(More)
My Ariston Margherita AWD 12 washer/dryer will light up as though a dryer programme has been selected,no such setting has been selected.can the programmer be "re-booted"
problem with ariston a1436: 1.) wash cycle is not complete. 2) with water coming out from the soap...
(More)
problem with ariston a1436: 1.) wash cycle is not complete. 2) with water coming out from the soap draw. Any help?
I have an Ariston AWD121 washer/dryer combo. When I run a dry cycle, the clothes come out soaking...
(More)
I have an Ariston AWD121 washer/dryer combo. When I run a dry cycle, the clothes come out soaking wet. Wash cycle runs fine-- it drains like it should. It looks like somehow water is incorporated during the dry cycle, whether I run it by itself or after a wash cycle. How do I fix this?