Will not turn on

Is this a tablet? You can do a factory reset by holding the power and volume down or up bottons at the same time for a few seconds. At first it will t
Reset keep holding the bottons a few more seconds until the factory reset option comes up. It will erase everything and give a fresh start.

check your ram.......via system info...

try resting your tv. power off it press and hold av select botton and then power on your tv wait few minutes and it will rest your tv.... if not used the same wy holding menu botton instead.

Hi there, please follow the below mentioned information. First of all you have to do press the power botton few second. Your laptop turn off then. Now you have to do these steps.

1. Press the power botton for restart the PC and repeatedly hit F8 until you have a menu in front of you.


2. You will find few option there. Just select these mention option " Last know good Configuration ...." use by your up/down arrow on your keyboard.
3. Press enter there.
4. your will see the system asking you for which OS you want to use. If you have only one OS then just press ENTER there or select the OS and Enter.

After these if you face the same problem then format the OS & install it again.Thanks & waiting for your feedback.

TRY HOLDING THE BUTTON DOWN AND LET IT FLASH 5 TIMES. RELEASE. WHEN THE DIMENSIONS ARE AT THE CORRECT NUMBER PRESS THE BUTTON AGAIN.

Get yourself a new one with new power supply new quad core new hard one terra evething new for a few dollars time change computers are something very different nowadays nothing to do with 10 years old machines....enjoy todazy life is not forever...;

maybe stupid but try to plug-unplog from power outlet.. does it make any sound? kliking sound? if nothing helps than your starter is gone.

You are having problem with the battery .

press and hold the tv botton on you dish remote till all the lights light up release the tv botton it should stay flashing then hit the larger of the two red power bottons next you will need to hit the up arrow one at a time till the tv shuts off when the tv shuts off you then hit the # botton at the bottom you wiil see the tv botton flash your code will then be saved

The cleam light blinking means that the unit was not able to reach a proper heated wash cycle. Either your heating element failed orthe actual sump/pump motor system has failed. Check the element in the botton and see if it looks broken anywhere. If you can see a broken spot, you will k now that is the trouble.

Good Luck!