Question about Washing Machines

2 Answers

Kenmore front load washer won't start. Lights just blink

I have a 3 year old sears kenmore washer that has always worked. When I turn it on, the lights just blink rapidly when I press the start button and nothing happens

Kenmore model 44152

Posted by on

  • 3 more comments 
  • 210laurel Apr 11, 2008

    Me, too. Does anyone have ideas for fixing it?

  • Anonymous May 20, 2008

    me too...anyone figured out what is going on? recalls? etc.

  • areyoukiddin May 28, 2008

    I am having the same problem. I tried unplugging it to see if it would reset it. I tried pressing the pause/cancel button. I made sure the water supply is on. I checked all of the doors to be sure they were closing completely. I think it may be time to call in a professional, which upsets me. Anyone have any ideas?

  • lcravatt
    lcravatt Jul 07, 2012

    so....what was you final result? I am having the same issues today.

  • flanqueen18184
    flanqueen18184 May 23, 2014

    Press and hold the drain and spin button until the control light goes out maybe didn't hold the button for at least deliberate second maybe as long as 10 second to disable the control lock If you don't have manual go to sear . Com look manual free free



2 Answers

I had same problem........push options and select button at same time, hold for 5 sec.......choose option.....machine stuck inbetween cycles.

at least it worked for me!

Posted on Aug 13, 2008


I think you may have the same problem I had. Try pressing the "options" and "select" button until the light near the Lock symbol goes away. Give that a shot. It worked for me

Posted on Jul 24, 2008

  • 2 more comments 
  • oldbirdwatch Feb 03, 2011

    Mine must be a different/older model as it doesn't have options or select buttons. After trying
    a bunch of different settings, I just spun the main control knob around clockwise 360 degrees,
    and it started right up.

  • lindarpeters
    lindarpeters Oct 26, 2012

    I pressed the start button and the cycle signal button at the same time for 5 seconds and it all reset.

  • reuben196
    reuben196 Nov 26, 2012

    It worked for me also!

  • Brenda Perry Oct 07, 2013

    Thank you, thank you, thank you!! It worked for me too!!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Keeps Stopping and saying UE

uE error code 79631512210 Kenmore Elite Washer - Sears ... > Ask an Expert
Jan 10, 2014 - uE error code 79631512210 Kenmore Elite Washer ' SearsPartsDirect. ... After unloading the washer completely, the machine attempts to rebalance the .... to ensure proper fit and to keep appliances running for years to come.

UE Error code on my front loading Kenmore washing machine > Manage My Life > Questions
Jun 13, 2011 - I have a Kenmore 3.5 cu. ft. front loading washing machine (model #4027) and it is 1 year old. ... what does the F35 error code on my kenmore elite front loading washing machine mean? F13 code on Kenmore Elite HE3 front loadingwashing machine.

Jan 21, 2016 | Kenmore Washing Machines

1 Answer

Kenmore HE2 Won't Turn On

1) test the power cord for open 2) test the outlet box, see for blown fuse or c.breaker put some desk lamp and see if work 3) test inside of the control board if there fuse blown or c.breaker tripped 4( test the lid switch is closed, can be faulty or open replace 5) test the input voltage 115 if there are the control board faulty.

Jul 18, 2012 | Kenmore HE2 Plus Front Load Washer

1 Answer

My kenmore front load washer doesn't want to start all lights are working but nothing happens even the door won't lock

your door switch is the problem,where the door latch goes into the machine a little switch sites behind this a safety feature and if this is broke the machine will still switch on but will not work it will need replaced they are cheap.adrianxxx

Jun 02, 2012 | Kenmore 44072 Front Load Washer

1 Answer

I have a kenmore top load high efficiency washer. When i press start it acts like its going to start then it unlocks and won't wash.

My problem is similar to one posted top. My HE Kenmore washer stopped in the middle of the cycle. I repaired the latch lock, thinking that would solve my problem, but now it will start the cycle, and stall at the rinse setting. I have to physically set it to rinse and spin, and sometimes that doesn't even work. Washer will be two years old this August. I have NEVER had a problem with a Sears washer, and I am VERY disappointed in this one. My last two gave me twenty years of service without a repair. Maybe Sears needs to go back to making theirs in the USA.

Apr 27, 2012 | Kenmore Washing Machines

1 Answer

Lights blink on settings around the knob won't run from there

Your door switch is not working, the machine thinks that the door is still open.

Mar 11, 2012 | Kenmore HE2 Plus Front Load Washer

1 Answer

Washer is not draining at end of cycle-puddle in washer at end of cycle -sears kenmore front loader 3 yrs old

Some of that is normal, if you turn the drum around you will here water. Mine do it also.

Feb 13, 2010 | Kenmore 44102 Front Load Washer

1 Answer

Kenmore HE 2 Plus-start class action against sears anyone?

but thats not a problem with the machine , the problem is residue of detergent stuck to the back of the stainless drum , detergent problem very , very commom in ge washers , its unbelivable sometimes the amount of scum that i find

Jul 15, 2009 | Kenmore 44072 Front Load Washer

1 Answer

Clanking noise during spin cycle

I was told by 3 technicians that my washer had shot bearings and this is a common problem for the Kenmore Elite Front loader.

Sears knows it and will not do anything about it except try to sell you a new washer since it costs $800 to replace the unit with the bearings.

Jan 02, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

2,113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

82208 Answers

Brad Brown

Level 3 Expert

17473 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides