Question about Symphonic WF104

1 Answer

Symphonic wf2720 need to put in game mode but have no remote

Posted by on

  • garyh58 Jun 14, 2008

    I'm having the same problem trying to get my PS2 to work without a remote.

    I have the game mode "on" on the menu. It will not allow me to do anything. I'm even having a hard time trying to find a replacement remote now.

    I have the same TV model displayed here, WF 2720, and searching for a remote now.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I haven't found a way without a remote except to unplug everything except a vcr or dvd, no other channel inputs and run the channel set up function. It will only recognise the one it can read and it will only leave you with the game channel... give it a try.

Posted on Feb 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to turn a symphonic tv into game


symphonic is well known for this-no buttons on unit for key features and a universal is not going to help either, suggest you go in search of the original remote and hang onto it.....

Aug 28, 2012 | Televison & Video

1 Answer

Trying to connect a Sega Genesis. I know it's connected properly to the place where the cable wire goes and then that is connected to the connector. What channel do I go to to play the games?


Hi,

The input from the Sega wont be on any channel number - you need to select the correct input for the Sega using the "INPUT SELECT" button on the Symphonic remote control supplied with the TV. Switch on the TV the Sega, then press this button repeatedly until you can see the picture from the Sega.

- If you are using the sockets on the BACK of the TV, the correct input is "VIDEO 1"
- If you are using the sockets on the FRONT of the TV, the correct input is "VIDEO 2". You can also switch to the "VIDEO 2" input by pressing the "GAME" button on the Symphonic remote - if you still have it.

If you don't have the Symphonic remote, look for a button marked "INPUT" or "SOURCE" if you are using a universal remote.

If you don't have any remote for the TV, you will only be able to use the sockets on the front of the TV. You will then need to switch to "GAME MODE" by using the buttons on the front of the TV:

1. Switch ON the TV and the Sega;
2. Press the MENU button;
3. Press the VOLUME UP button to open the PICTURE MENU;
4. Highlight GAME MODE using the CHANNEL UP/DOWN buttons;
5. Set GAME MODE to "ON" using the VOLUME UP/DOWN buttons;
6. Press MENU again to close the menu

You should now be able to see the picture from the Sega. If not, check you have correctly connected the Sega to the TV. When you have finished using the Sega you will need to use the method above to switch game mode off again.

Hopefully, I've covered every possible angle. If you have a different Symphonic TV model from the one listed above (ST420FF), the method should be similar, but if you have any difficulty, please post back for further assistance.

BElectric.

Jan 16, 2011 | Symphonic ST420FF 20" TV

1 Answer

How to get universal remote to turn the tv to game mode


Hi,

I don't know if this can be done with a universal remote, but if you can let me know which brand and model of universal remote you are using, I will check if it is possible. If your universal remote has an "AV", "SOURCE" or "INPUT" button, try these but make sure the game system is switched on so you are able to see if/when you have changed to the correct mode.

If you don't have the original Symphonic remote, you should be able to switch the TV to game mode using the buttons on the front of the TV as follows:

1. Switch the game system on
2. Press the "MENU" button on the front of the TV
3. Highlight "PICTURE" using the CHANNEL UP/DOWN buttons
4. Press the VOLUME UP button once to enter the PICTURE menu
5. Highlight "GAME MODE" using the CHANNEL UP/DOWN buttons
6. Use the VOLUME UP/DOWN buttons to set "GAME MODE" to "ON"
7. Press "MENU" to exit the menu and play games.

The menu should automatically close anyway if you don't press any buttons for about 15 seconds.

When you have finished playing your game, repeat the above steps to set "GAME MODE" back to "OFF" and return to watching TV.

Hope this helps. Please post back for further assistance if needed.

Regards,
BElectric.

Dec 23, 2010 | Symphonic ST419E TV

1 Answer

I cant select games mode manually on the symphonic


I think, after you have the rca jacks inserted into the tv and to the game you're playing, youshould be able to move the channel button down past channels 3 and 2. And or hit menu on the tv and look for setup. Try that!

Nov 29, 2009 | Symphonic ST419E TV

1 Answer

I need to put a philips TV in game mode, but I lost the instructiuons... HOW????? please


it should be a button onhe remote control with an arrow going in a cube or something like that with an arrow.press it to change in video channel dvd channel until you find the game ode

Jan 13, 2009 | Symphonic ST420FF 20" TV

2 Answers

Where do I connect my games to the tv.


You have to have external jacks on TV yellow,red,white jacks these are used for hook ups to DVD-VIIDEO games, you can buy a Video converter at Wal-Marts.

Dec 26, 2008 | Symphonic ST419E TV

1 Answer

No tv remote


Go to Radio Shack and get an universal remote control, mine is a Phillips Universal and just program it to your tv. It has a tv/vcr input to let you switch to the right "input"/channel.

Sep 11, 2008 | Symphonic ST420FF 20" TV

3 Answers

I own a symphonic 27" television


I had this problem on a symphonic 27 inch TV I just bought from a friend who no longer had a remote. The thing with the menu and buttons on the front of the TV doesn't actually change the TV to true game mode. I don't know what it acutally does, but it isn't really in game mode. When it is in true "game mode" you can't change the channels until you turn game mode off. What I did was bought a universal remote (a specific one that someone told me about) for 8 bucks at walmart and I was then able to switch to game mode with the Input select on the remote. The remote I bought that actually worked is this one: http://www.amazon.com/Philips-Magnavox-PM435S-4-Device-Universal/dp/B00006686A/ref=acc_glance_ce_ai_-2_1_tit/002-3174824-8273629
Make sure you look at it before you buy it and make sure it has a button that specifically says "input" on it. I know that some of the universal remotes don't have an input select button or one that doesn't work. As long as you get a Philips-Magnavox that has that button, you should be ok. Much better solution that paying 30 bucks for a new remote specifically for the TV. Hope this helps.

Mar 04, 2008 | Symphonic ST419E TV

3 Answers

Television question


****. Same problem. No luck on the down from channel 2 thing. Fuckin old crappy tvs.

Jun 21, 2007 | Symphonic ST413C 13" TV

Not finding what you are looking for?
Symphonic WF104 Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Cindy Wells

Level 3 Expert

5583 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Are you a Symphonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...