Question about DXG Technology DXG-506V DV Digital Camcorder

1 Answer

LCD doesn't show image when I try to take a picture in dark area with flash. The picture are not bright and clear.

Posted by on

1 Answer

Re: LCD doesn't show image when I try to take a picture...

My LCD screen on my dxg-506v DV doesn't want to display anything all i see is nothing but a bright screen and absoultly no picture on the LCD screen the only way i can see a picture is through my tv screen. i tried and tried and tried using the pc disc that came with the camera and still nothing works the china people just don.t build solid enough technology. like may be get those people out of those sweat shops and start paying them some real money so that much better technology can be made in china

Posted on Dec 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What should I replace next, I have a samsung lcd with no backlights but picture shows with a flashlight in a dark room.

even if you changed the back light inverter the fault remain as same, it seems to be the back light LED is damaged carefully remove the outer frame of the panel then dis connect the LCD then remove the frame of the defuser screen , take out plug your TV, check the LEDs

Feb 15, 2016 | Samsung LN46E550 46 inch LCD HDTV 1080p...

1 Answer

LCD doesn't show image when I turn to take a picture in dark area. With the flash, the picture are not bright.

Even i had faced the exact problem but it was due to low battery , hope u hav checked that ... of course the pic took in dark area arent brighter than other pics ... Try hard resetting the camera by taking the batteries out for few min ...

Dec 26, 2007 | DXG Technology DXG-506V DV Digital...

1 Answer

I have a sony camcorder. Both the viewfinder and LCD arefailing to show clear pictures. I have this dark grayish wave. What could be the problem? The camcorder is only 4 years

It seems problem of bad ccd imager chip in your Sony camcorder.
let me know exact model number written at bottom to provide you more info.

Sep 21, 2009 | Sony Video Cameras

1 Answer

Shuts the lcd down ?

Is it possible that the brightness of the LCD was turned down?
You might want to try turning it full bright. There are directions in the instruction book on how to do this.
Next select the viewfinder to turn on when you pull it out. Close the LCD panel and pul out the VF and look thru it in doors first and see if the picture is normal, now go outside while looking in the VF and see if the picture slowly goes dark. If it does looking at it this way then it would indicate that the Iris is closing too much. Go back inside.
In the menu there is an option to reset everything back to factory settings. Sometimes it is possible to have accidentally changed a setting while you were in the menu. Go thru the menu and execute all of the pages that have a reset option. Then test the camera again. If the image goes away in bright light it is possible that the adjustment settings for the Iris have been corrupted and the camera will need to be brought into an authorized JVC service center that has DVC camera experience and they will be able to readjust the Iris. It could also mean there is some kind of malfunction. If the image stays visible in the VF then the LCD might have just aged and lost its intensity to where you are unable to see it outside anymore. The DV5000 is 4 or 5 years old now?

Apr 23, 2008 | JVC Cybercam GR-DV500US Mini DV Digital...

1 Answer


Found a customer service notice on JVC web site reporting (probable cause as a failure of CCD image sensor) and offering repair at no charge!

Mar 24, 2008 | JVC GR-DX97 Mini DV Digital Camcorder

2 Answers

Won't record/No picture thru the LCD screen or viewfinder in Record or Standby Mode

it is a common problem with them. sony has a recall on ccd imager for this model. call sony and they will fix it for free

May 29, 2007 | Sony Handycam DCR-TRV22 Mini DV Digital...

2 Answers

No image on lcd or view finder help

i think the iris of your camera is not need to clean the iris by the lighter fluid cause of some grease that sticking in the iris...don't attempt to do this is you are not a technician...

May 05, 2007 | Panasonic NV-DS60 Mini DV Digital...

2 Answers

Red lines on screen when recording

Important Notice
Digital 3CCD Camcorder

Panasonic has discovered a premature component failure with a limited number of PV-DV953 (2003 Model) and PV-GS200 (2004 Model) 3CCD camcorders, which may cause an abnormal camera picture (incorrect color reproduction, reddish, noisy image, etc). This anomaly is limited to a specific range of serial numbers listed below.

If your camcorder demonstrates the specific symptom and falls within the serial number range, Panasonic will repair the camcorder free of charge.

Please call the following toll-free number for assistance in receiving a free repair:

Panasonic Call Center: 1-800-973-4264

Model # Serial Number Ranges

PV-DV953 (2003) E3Hxxxxxx, F3Hxxxxxx, G3Hxxxxxx, H3Hxxxxxx, I3Hxxxxxx, J3Hxxxxxx, K3Hxxxxxx, L3Hxxxxxx and A4Hxxxxxx
PV-GS200 (2004) C4Hxxxxxx and D4Hxxxxxx

Nov 19, 2006 | Panasonic NV-GS200 Mini DV Digital...

Not finding what you are looking for?
DXG Technology DXG-506V DV Digital Camcorder Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top DXG Technology Video Cameras Experts


Level 3 Expert

94252 Answers

Mike McWhinney

Level 3 Expert

537 Answers


Level 3 Expert

2121 Answers

Are you a DXG Technology Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides