- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you need to hook up the foot brake like it said but hook up a switch on the parking brake wire to ground do not hook it up to parking brake just a switch ground one side ant togle it while your foot is on the brake once the screen is on leave the switch in that position you will have to do this every time you turn the car off but you can see the screen while driving
Many aftermarket car stereo has to output trigger wires, one antenna and one amplifier. Antenna trigger only works in radio mode for the power antenna to operate. Amplifier wire operates in any mode the stereo is in. Check to make sure you hooked up the correct blue wire to your amplifer.
I've got an Alpine CVA1004 and use my ipod on the aux input of the headunit. The alpine-ipod interface was too confusing for me, with the ipod connected to the aux input, I just control the music from the Ipod, I find it easier that way.
there is a wire on the back of the unit marked hook up 2 parking brake....what i did was ran that wire to a toggle switch and to the cigarette lighter ground and mounted the toggle switch on my dash...then all u have 2 do is flip the swith off and on and it tricks the player to thinking the car is in park and will play right away...
lol i had the exact problem that you are having with my alpine. The solution is taking the blue cord that was inside the vehicle (forgot what cord it was) and actually connecting it with the other blue cord thats different makes the factory amp read the cd player and ta-da it works. crazy isn't it