Charging the NV20 is simple, just plugin the cable to the power supply and it will charge. Inorder to charge the camera you must leave the battery inside the camera and when it's done charging you will see the lit up arrow on the end of the cable turn from red to green.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The NV20 is a 12MP camera, and can fill up a 1GB card fast, especially if you accidentally take a video (thinking it was a photo). Have you checked to make sure that all your photos are actually "photos" (i.e. not videos)? Other troubleshooting steps for memory card problems may be found here.
hi try to reset ur camera...To do such reset, turn on the camera and hold
the menu button down for longer than 5 seconds. A message should
hopefully come up on your LCD asking if you want to reset the camera.
No issue. The charger is adapted to the battery. You can leave the battery over night in the charger without problem. The fact that the light goes off means that the charger surveys the voltage and switches off when the battery is charged.
If you leave it longer and the battery looses charge, it will be recharged automatically.
The EasyShare camera dock automatically stops charging the batteries after it registers a full charge, so it is fine to leave the EasyShare digital camera on the EasyShare camera dock for short periods. However, leaving the camera on the dock for longer periods (days or weeks) is not recommended because this can cause problems with your camera and the batteries.