Question about Phones

1 Answer

Wireless phone static

I hear static when my wireless phone is turned can this be fixed

Posted by on

1 Answer

Re: wireless phone static

Lost Manual.  Had electrical storm and message keeps telling me to reregister it.  I have a base station and two out stations in other rooms.  How do I register them.
Thank you Anthony Bellotte

Posted on Sep 06, 2008

1 Suggested Answer

  • 19 Answers

SOURCE: I am getting static when

THERE is so much frequency drift nowadays i strongly suggest that a wise option is to ensure that your unit is earthed .
Best Regards

Posted on Mar 14, 2011

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i fix my phone, it rings, but i cannot dial out and there is lots of static and buzz when i pick up the phone

Do you have other phones on the same line?
Are they clear or do they have the static. If it is a telephone company old copper line and it happens on all phones it maybe a Telco problem.

Sep 17, 2014 | Uniden HO 200 Home Organizer Phone (HO200)

1 Answer

Cordless phones

1) unplug all phones
2) plug them back in and check line.
If you still have the issue,!take a corded phone with. Phone jack coed to your box on the outside of the house. Usually gray, unscrew the first box - you'll see modules there - the one with the last four of your phone number is the module we'll use. Follow the directions on the box to open that module - plug your phone into the module. Here's the important thing - if you don't hear static, then the problem is from inside your house. If you call att to come out they will charge you - but that's the whole unplug the phones and centralize your base better. However, if you still hear static in the outside box, it's an att issue and have to come out at no charge.

Jun 24, 2014 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Norstar line static

Most likley not a phone issue since you say its a line.
Call your carrier (i.e Bell, AT&T ect) whom supplies your phone lines to fix it.

Jul 23, 2012 | NorStar M7324 Telephone

1 Answer

I have a Uniden set of of phones - 5.8 GHZ. Both are making a loud static sound when you turn it on. We can hardly hear. We unplugged both sets for a while, but this did not get rid of the static sound.

• Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors,fluorescent lights, and electrical appliances.
• Move to another location or turn of f the source of interference.

Dec 31, 2009 | Uniden 5.8GHz Cordless Phone

1 Answer

Telephone wiring- phone rings in once -static on line-call out works Seams to be worst after rain or great moisture. Sometimes clears up suddenky

I have the same problem. You might try taking a corded phone to the service box outside where the telephone line connects to your house. On the underneath side there is a line jack used for test purposes. Plug your phone in there to see if static is heard. If you hear no static from this test jack, but do hear static from in the house corded phones, you probably have a wiring issue inside the house. If you hear static from the outside test jack, that's the phone companies problem to fix. Hope this helps.

Aug 31, 2009 | Panasonic Phones

2 Answers

Static from a wireless (plugs into the wall)intercom

There are a few possibilities that could be the cause. The fact that its only one unit malfunctioning most likely means it is some type of fault in the unit it self and not the connection. Have you swapped it with another unit to make sure its the unit itself? If so try these. The first and most simple is the easiest to fix. It may sound odd but dirt and other contaminants can cause a great deal of interference "static" when they get worked into the metal connectors that carry signals. If that is the case, I recommend that you unplug the device and use "electronics" contact cleaner on all the connectors and if possible the metal contacts themselves. If it is not a containment then it could be a loose connector blown speaker/mic or even a solder joint inside the device. If that is the case you may have to have it repaired.
Hope this helps.

Apr 20, 2009 | Southwestern Bell Phones

1 Answer

Static in my panasonic telephones

A possible cause for the static in your cordless phones could be dimmer switches around the area of your phone that causes static. Turn the switches completely off (not just turned down) and see if the static leaves. You can replace the dimmers with regular switches if that clears your static. If it does not, another trace for interference: you will have to take a portable radio and turn it to AM 550 mHz and tune it to the loudest crackling noise. Carry the radio around looking for the loudest static interference. Could be a loose connection in a receptacle or panel box. Any small malfunction can cause static on wireless devices.

Nov 21, 2008 | Panasonic KX-TG1033S Cordless Phone

1 Answer

GE cordless phone 2.4 ghz

Your phone must be away from other appliances (i.e. microwaves, radios) and computer equipment (i.e. wireless routers, monitors). The phone runs on 2.4GHz which often conflicts with them.

Mar 15, 2007 | GE 21009GE3 for 21028GE3, 21028GE3,...

1 Answer

Static when picking hand set up

find the right channel for it on the handset.

Jan 12, 2007 | GE (29297GE3) Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

1,265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts


Level 3 Expert

93922 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides