How u doing man im hookin up my pioneer deck to a 2002 dodge ram and it wont turn on for anything
the orange out of the deck is a constant and the yellow is illumination correct? i think thats how it was for 99 and down
thank you jared
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, the way you properly reset that deck is this. Get the removal tools, slide them in to release the deck. Once its out look in the back corner of the deck for a fuse. R -R the fuse you should hear it cycle, thats it.
If you have a blue with white on it or a solid blue lead, I'm at a loss, however the manual even states that colors may change w/o notice. Best way to tell is to use a meter, black probe to ground and red probe to the orange. Put it on DC voltage then turn the ignition to acc. then turn on the deck, my hunch is that it's your amp remote turn on wire for an external amp or it can be used for a power antenna. Voltage should be 12.2-13.8dcv. Hope this helps
here are the wiring for the deck and the car: Deck: 12v - red ignition: yellow blk - ground orange - dimmer white - frt left + white /blk - frt left - gray - frt right + gray /blk - frt right - green - left rear + green /blk - left rear _ Purple - right rear + Purple w/blk right rear - Car: 2002 Oldsmobile Alero Car Radio Stereo Audio Wiring Diagram
Car Radio Constant 12v+ Wire: Orange
Car Radio Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black/White
Car Radio Illumination Wire: Brown
Car Stereo Dimmer Wire: Gray
Car Stereo Antenna Trigger: Dark Green
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue
you are going to need a test light.there are 2 power wires one of the wires will only have power when the key is on.the other wire will have power all the time for the memery backup/clock if i remember correctly you are looking for a orange wire and a red wire and i think its the orange wire for the memery backup. p.s check the fuses your truck has two for the radio.
Pioneer usually use: red - 12 volt batt. ignition/acc yellow - 12 volt batt. memory black - ground blue - power ant. blue/white - amp turn on orange - illumination ( 12 volt light ) ( not all deck ) orange/white - dimmer ( not all deck ) gray - right front + gray/black - right front - white - left front + white/black - left front - violet - right rear + violet/black - right rear - green - left rear + green/black - left rear -
Is this what your looking for?
We always used to use the remote to enter the code and the unit would reset. Without the remote, dont think it works, sorry man. Go to a Kenwood installer and they will probably be able to help you will you wait. I would, if you are in Greenbank QLD Australia. :