Samsung DVD-V4600 disc loading but will never play

Question

Question about Samsung DVD-V4600 DVD Player/VCR

3 Answers

Samsung DVD-V4600 disc loading but will never play

When I insert a disc is stays in the loading mode and will never play. How can I correct this?

9 more comments
Anonymous Dec 26, 2007

I have the exact same problem, and oddly, it occurred on the same day. I have absolutely no clue what steps to take to resolved the problem.
Mary23 Dec 27, 2007

You should monitor the content of solutions before sending them to anyone.
BlueViolin Apr 27, 2008

Samsung V8600 keeps "loading disc" and eventaully shows error message. Shall I chuck it? Its 2 years old.
Anonymous May 06, 2008

DVD's will not play. There is an error message saying just that for any DVD. Nothing I can do helps.
Anonymous May 17, 2008

Put in DVD it says loading but it never plays the DVD.
Anonymous Jun 26, 2008

I've been having the same problem. Called Samsung and after receiving a few useless suggestions from a smart-@## rep, I was told Samsung could fix it if I sent it in with a check for $120, which is more than I paid for the unit. Any real solutions would be welcome.
Anonymous Jul 13, 2008

Same problem. The screen reads, "loading" for a brief eternity, before announcing that "This disk cannot be played. Please check the disk." Ours is an approx. 2 year old DVD-V4600.
Anonymous Oct 21, 2008

same problem and mine is about 2 yrs. old.
southern_bel Oct 21, 2008

same problem, mine is about 2 yrs. old. all of the sudden its not
playing my dvds anymore, it will play videotapes. but i get that same
message about "can neither be played or recorded. check the disc." but
i know it's nothing wrong with the disc, the player has been playing
these discs hundreds of times. also the dvd door won't stay closed.
mtldev Dec 19, 2008

I did clean the lens as suggested.. But i still have the same problem. kindly help
Anonymous Dec 20, 2008

SO FRUSTRATING! mine wont even let me get the dvd out now. :(

×

3 Answers

Anonymous

I'm idiot because I bought a Samsung DVD.

It was never working correctly, and I advise every one not to buy any Samsung DVD or VCR.

Posted on Jul 06, 2008

sd44

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

Neither my DVD or video played and I was convinced it was the player since it didn't seem to be loading. However, as it turned out, I had not selected the source on the TV.

Posted on Jul 20, 2008

1 Suggested Answer

6ya staff

2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Add Your Answer

Upload

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I have recently purchased a used Sony RDR-HX900 but when I insert a purchased DVD film, the message is first :loading, then: unable to play disc. It is the correct region code.

The drive may be defective.

Nov 13, 2016 | Sony Televison & Video

1 Answer

Player stays in loading mode never finishing and playing the dvd

see the causes and fix it: God bless you

No disc. - Load a disc into the tray.
Disc has been loaded upside down. Place the disc with the label side up.
Disc region code does not match region code of the player.
Disc type is not the correct type to play.
Disc is damaged or dirty. Clean the disc or try another.
Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.

Clean with disk cleaner the Lens +OPU

Jul 21, 2012 | Audiovox D1812 Portable DVD Player

1 Answer

E disc it doesn't rI have a gpx DVD player D200B and when I insert thecordnize it. Says

see the next remedies:God bless you

No disc. - Load a disc into the tray.
Disc has been loaded upside down. Place the disc with the label side up.
Disc region code does not match region code of the player.
Disc type is not the correct type to play.
Disc is damaged or dirty. Clean the disc or try another.
Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours

Jul 21, 2012 | GPX Televison & Video

1 Answer

HOW DO I TYPE NAMES OF CD OR DVD ?

You can't add a title to a disc from a player (such as this). You can only add a title on a disc writer before finishing the disc. (The only exception is RW (rewritable) disc which can be unfinished.) If a title (disc, chapter or track) is on the disc you can display it. Press Title on the remote. If you want to read all of the information on any disc, insert the disc and press Load on the player (when in Stop mode) or press the TV/DiscExplorer/DVD button to set the unit in Disc Explorer mode. It takes about 30 seconds to load the data. Press Stop to cancel the data search. Then use the folder buttons (ALL,DVD,CD,A,B,C,D) on the remote or the player to read the various items. Press Return to leave the folders. If you enter the Disc Explorer while playing a disc, the playback will stop and you will have to press Play to restart (Resume is not an available option).

Once loaded the player will store the data even after you remove the disc. It will clear when a new disc is inserted or you press Load.

The manual for this unit is available at: http://esupport.sony.com/US/perl/model-documents.pl?mdl=DVPCX850D .

I hope this helps.

Cindy Wells

Oct 12, 2010 | Sony DVP-CX850D DVD Player

2 Answers

We can't get the factory 6 disc cd player to load more than 1 disc. What is the sequence for loading additional discs?

The following is the owner's manual for your 2004 Dodge Neon:

http://www.dodge.com/en/owners/manuals/index.html?year=2004&nameplate=Neon

P.99 describes how to load discs:

1. Select and press any numbered button without an illuminated light above it.
2. Insert the CD while the light above the chosen button is flashing and the two lights on either side of the slot are illuminated.
3. Upon insertion, the CD will begin to play, and both the button light and the lights in the corner of the loading slot will illuminate.
4. Repeat the process for loading any additional CDs. The CD playe rwill stop while additional CDs are loaded.

Playing Discs
The radio will show the CD number, the CD track number, and the Track Time Elapsed while the radio is in the CD mode. IF more than one CD is loaded in the changer, the changer will automatically play the next disc after playing the last track of the current disc.

Wow, that's a lot of typing.
I didn't know the 2004 Dodge Neon had such a nice changer.
Good luck.

Jul 04, 2010 | 2004 Dodge Neon

2 Answers

The DVD player says bad disc with every dvd I insert

hit the change mode button

Dec 19, 2009 | Onkyo DV-CP701 Multi-disc DVD Player

1 Answer

I insert a disc. It loads, then either 1 or 2 shows in the display, but nothing functions and the disc will not play. It is a region 2 disc I tried

\usually when a disc won`t play ,it just displays "No Disc".

Is the disc matching the dvd code?
Is the region code correct?
Have you checked what discs the dvd will play, in front of manual.

If those are ok the dvd must have condensation in it.
Place in a warm room,turn on and leave for 2-3 hrs
Then try again fingers crossed for you.

Dec 03, 2009 | Toshiba SD-3800 DVD Player

1 Answer

Discs won't play.

please change laser unite then solve your problem

Jul 16, 2009 | Sony DVP-NS575P DVD Player

1 Answer

No Disc Signal

That one disc is damaged or in the wrong format

Aug 09, 2008 | Philips Magnavox DVD/VCR Dual Player

3 Answers

Bad disc

I have the same problem with some of the Discs I have burned. Most people say the power supply, but I have 2 of these units so I swapped the power supply to see if that was it. The problem stayed in the one machine, ruling out the power supply.

Aug 26, 2007 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?

View Most Popular

DVD-V4600 DVD Player/VCR

Televison & Video

I have recently purchased a used Sony RDR-HX900 but when I insert a purchased DVD film, the message is first :loading, then: unable to play disc. It is the correct region code.

Sony Televison & Video

Open Questions:

0 Answers

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

. DVD-V4600 DVD Player/VCR Manual

DVD-V4600 DVD...

Have a manual for Samsung DVD-V4600 DVD Player/VCR? Or just drag it here!

jen4_3vino · Accepted Answer · 2008-10-16T13:46:40.6730000Z

jen4_3vino

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

I had the same problem. All I did was remove the cover and cleaned the lens with a cotton swab and rubbing alcohol. DVD player works like new.

Posted on Oct 16, 2008

Samsung DVD-V4600 disc loading but will never play

3 Answers

jen4_3vino

Anonymous

sd44

1 Suggested Answer

6ya staff

Add Your Answer

Attachments: Added items

Related Questions:

I have recently purchased a used Sony RDR-HX900 but when I insert a purchased DVD film, the message is first :loading, then: unable to play disc. It is the correct region code.

Player stays in loading mode never finishing and playing the dvd

E disc it doesn't rI have a gpx DVD player D200B and when I insert thecordnize it. Says

HOW DO I TYPE NAMES OF CD OR DVD ?

We can't get the factory 6 disc cd player to load more than 1 disc. What is the sequence for loading additional discs?

The DVD player says bad disc with every dvd I insert

I insert a disc. It loads, then either 1 or 2 shows in the display, but nothing functions and the disc will not play. It is a region 2 disc I tried

Discs won't play.

No Disc Signal

Bad disc

Not finding what you are looking for?

DVD-V4600 DVD Player/VCR

I have recently purchased a used Sony RDR-HX900 but when I insert a purchased DVD film, the message is first :loading, then: unable to play disc. It is the correct region code.

Open Questions:

why does angle-timer and menu will not work but record does?

my dvd player on my samsung home theater system wont read dvds

where is the eject button on a samsung dvd player?

dvd wont eject also does three quarters into deck

Related Topics:

Ask a Question

Check Out the Latest HD Televisions Report

Top Samsung Televison & Video Experts

The Knight

Donald DCruz

Jerry Greenberg

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

. DVD-V4600 DVD Player/VCR Manual

Samsung DVD-V4600 disc loading but will never play

3 Answers

jen4_3vino

Anonymous

sd44

1 Suggested Answer

6ya staff

Add Your Answer

Attachments: Added items

Related Questions:

I have recently purchased a used Sony RDR-HX900 but when I insert a purchased DVD film, the message is first :loading, then: unable to play disc. It is the correct region code.

Player stays in loading mode never finishing and playing the dvd

E disc it doesn't rI have a gpx DVD player D200B and when I insert thecordnize it. Says

HOW DO I TYPE NAMES OF CD OR DVD ?

We can't get the factory 6 disc cd player to load more than 1 disc. What is the sequence for loading additional discs?

The DVD player says bad disc with every dvd I insert

I insert a disc. It loads, then either 1 or 2 shows in the display, but nothing functions and the disc will not play. It is a region 2 disc I tried

Discs won't play.

No Disc Signal

Bad disc

Not finding what you are looking for?

DVD-V4600 DVD Player/VCR

I have recently purchased a used Sony RDR-HX900 but when I insert a purchased DVD film, the message is first :loading, then: unable to play disc. It is the correct region code.

Open Questions:

why does angle-timer and menu will not work but record does?

my dvd player on my samsung home theater system wont read dvds

where is the eject button on a samsung dvd player?

dvd wont eject also does three quarters into deck

Related Topics

Related Topics:

Ask a Question

Popular Questions

Samsung DLP TV shuts off

Numerous white spots on Smasung DLP TV

Samsung DLP TV shuts off

Removing stand from tv

No picture

Check Out the Latest HD Televisions Report

Top Samsung Televison & Video Experts

The Knight

Donald DCruz

Jerry Greenberg

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

. DVD-V4600 DVD Player/VCR Manual