Expert
(877) 477-7278
Washer and Dryer parts delivered overnight...
Answer
Why has the drum on my washing machine stopped going round? The machine seems to be going throug the...
(More)
Problem for Zanussi ZWF1430W Front Load Washer
When start washing, filling water comes out from
Solution #1
posted on Oct 11, 2009
This is most likely due to having the height of the drain hose too low in the drain pipe so the water siphons out as the machine tries to fill up. This will eventually lead to an F20 error displaying saying that the machine was not able to fill with enough water in the 6 minutes allowed by the on board controller in the Whirlpool.
The solution is to measure the height of the top of the arch of the drain hose or direct connecting point to a drain and make sure that his is at least 32 inches and no mort than 36 inches from the floor.
The solution is to measure the height of the top of the arch of the drain hose or direct connecting point to a drain and make sure that his is at least 32 inches and no mort than 36 inches from the floor.
Yes
No
Popular Solutions for Zanussi ZWF1430W Front Load
Questions and Unsolved Problems for Zanussi ZWF1430W Front Load
Do you recommend Zanussi ZWF1430W Front Load Washer?
Answer
Answer
zanussi washing machine bearing replacement instruction manual
Answer
my washer wont spin do you think the bushers my have gone
Answer
same problem as jrobb887, turn it on, goes to end and beeps 4 times, pauses then repeats.
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Zanussi ZWF1430W Front Load...:
Related Products & Issues:
Top Washing Machine Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Washer & Dryer Repair
Best Washing Machines
Recommended by Owners
Recommended by Owners
