Send or recieve a fax

Use the fax to make a copy if the copy is bad the fax you send will be bad.

DickyO

first, you can download the manual from the website at www.brother.com

but the basics, put your paper that you want to send upright in the document feeder, touch the fax button, dial the number, and your done.
make sure your phone cable is wired correctly to the fax.

The machine is set with the sleep mode as a default. The fax part can be changed to recieve a fax by pressing the fax mode button. Press it until it says Fax only, not F/T. F/T means Fax/Telephone. This mode would make it to where you have to pick up the reciever and press start when a fax comes in. The Fax only mode means it will pick up everytime a fax comes in automatically. Let me know if this was helpful. Please give my helping a rating. Thanks!

The easiest thing to check is the recieve mode setting. most of the time when this happens the machine is set on manual recieve. Set it to automatic recieve and you should be fine.

please help me how to switch my machine Brother MFC440cn to fax/tel mode.

Function 74 set 12 set 2 set stop

Some models will actually stop working whenever a drum message is displayed.
Remember, you do not need a drum to fax out (only to print confirmations) so i would go ahead and change the drum.
Ons ome models you can adjust to how low you want to set it or remove it all together.
It will store it in memory for a while (providing you do not turn off the machine, and print as soon as you replace the toner)

Check an make sure the phone cord from the wall is plugged into the back of the machine in the port marked "line" and not "phone"

error 000019-0000

pleas close the redial option and other number may be busy or finished