Question about ASUS P4S800D-X Motherboard

2 Answers

AGP 8x not supported

Video card replaced, AGP slot, from ATI Radeon 9600 Pro to VisionTek x1650pro. Power on returns 1 long and 2 short beeps. Video card error. Returned original card to AGP Slot, power on returns 1 long and 2 short beeps. Removed ATI Radeon 9600 and added old PCI video card, again, 1 long and 2 short beeps.
ASUS P4S800D-X manual states "Install only +1.5V AGP cards" (Page 1-11 of user manual). I believe the X1650 pro is AGP 8X (.8v) bus configuration.
Is this motherboard now toast?

Posted by on

  • goldcountry Dec 27, 2007

    Thank you for the suggestion. The BIOS is not available to adjust until the video is available. I did clear the Real Time Clock RAM in CMOS, and that did not help.


×

Ad

2 Answers

I have removed the motherboard from the case, disconnected everything except the power, the speaker, and the power buttons. All the pci cards and memory are out. The hard drives are also disconnected. I also put the memory stick back in and still get the same result. Very frustrating, but I appreciate your continued thoughts.

Posted on Dec 28, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Just a thought, but have you tried going into the bios setup and setting bios to system defaults or safe setting, saving and rebooting?

Posted on Dec 26, 2007

  • Tel1
    Tel1 Dec 27, 2007

    Is the first PCI slot empty? If not, make sure nothing is plugged in it, as it shares an IRQ with the AGP slot. I know the beeps indicate a video problem, but if you have more than one stick of memory in there, try pulling all but one stick.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

For


I have not been able to add any AGP card to my PC.
My PC is a cube PC so I have been trying to install a "low end" AGP video card without a separate power connector. My only really requires are DirectX 9.x support and a minimum of 128MB (and no power connector)

The card I am currently trying to install is a Gigabyte ATI Radeon 9600Pro with 256MB.

I have also tried a ATI Radeon 9550 with 256MB and a Nvidia card

I have done all of the usual things, such as disabling onboard graphics, removing old video drivers, verified latest chipset drivers are installed, I reviewed the graphic adapter and don't see any conflicts etc.

I wonder if any of the cards I am trying to install will work with my AGP slot.
The manual for this Gigabyte card states "AGP 3.0 Slot or greater is required"
Unfortunately, this requirement wasn't on the Gigabyte or NewEgg web sites or the back of the box. Only in the install manual.

My Motherboard manual states "AGP 1.5v Card is required".

I got great AGP information from www.playtool.com. I used some of the tools suggested there such as Sandra Lite and other tools to try to determine what version my AGP Slot is. These tools don't seem to clearly state what

My PC is a Small Form Factor PC with 220W Power Supply.
It has integrated Intel Extreme Graphics
gBox P4 Blue CF-986L
Motherboard is a CFI-968L with last bios released (1.04)
www.american-media.com
Pentium 4 3.06Ghz
1G RAM
80G HD
Chipset is Intel 845GE
Intel Extreme Graphics
Windows XP Home

This is a awesome PC and I really would like to extend the life of it my adding any AGP card that supports DirectX 9.x


Read more: Adding ATI Radeon 9600Pro - AGP Slot Issue? - Tech Support Forum http://www.techsupportforum.com/forums/f24/adding-ati-radeon-9600pro-agp-slot-issue-128485.html#ixzz1FKivifx5

Feb 28, 2011 | ATI RADEON 9600 Pro, (256 MB) AGP Graphic...

1 Answer

When i connect my graphics card to my pc i get a black screen there is no beeps and i cant even hear an windows sound. when i disconnect my gpu my pc works fine i have tried to disable onboard graphics...


Hello xvanpersiex, these are "Full Specifications" of your [Graghis Card].
"Check this to the 'Specs' of the "Motherboard to see if it 'Supports' the Graphic Card?"
"Try 'disconnecting, and reconnecting' the "Graphis Card"
Verify that 'all' the "Connections" are "Tightly Inserted."
*Go to the Control Panel > Device Manager > AGP Graphic Card > Verify Installed? >
Update Driver! > Restart Computer"

"If this information helped? Return and give a "Helpful Rating," please!
Thanks, paul7of9"
ATI Radeon X1650Pro (AGP 8x, 512MB) General

  • Device Type Graphics adapter

  • Enclosure Type Plug-in card

  • Vista Capability This graphics card is capable of running the new Aero interface featured in Windows Vista Home Premium and higher.

  • Interface Type AGP 8x

Processor / Memory
  • Graphics Processor / Vendor ATI Radeon X1650 Pro

  • Graphics Card Performance This card's graphics processor and memory mean that it is not recommended for most games, but it will still be fine for office applications and other normal computing tasks.

  • RAMDAC Clock Speed 400.0 MHz

  • Video Memory Installed 512.0 MB

  • Technology DDR2 SDRAM 128-bit

  • Features Avivo Technology

Video Input
  • Type None

Video Output
  • API Supported OpenGL 2.0,
    DirectX 9.0

  • Max Monitors Supported 2.0

  • TV Interface HDTV out

  • Analog Video Format S-Video,
    Composite video

  • Digital Video Standard Digital Visual Interface (DVI)

Expansion / Connectivity
  • Interfaces 1.0 x DVI-I (dual link) - 15 pin HD D-Sub (HD-15),
    1.0 x HDTV output - 29 pin combined DVI,
    1.0 x VGA

  • Compatible Slots 1.0 x AGP

Miscellaneous
  • Microsoft Certifications Certified for Windows Vista

Software / System Requirements
  • OS Required Microsoft Windows XP,
    Microsoft Windows XP Media Center Edition 2005,
    Microsoft Windows XP 64-bit Edition,
    Microsoft Windows Vista

  • Recommended Power Supply 350.0 Watt

  • Peripheral / Interface Devices CD-ROM

Feb 22, 2011 | ATI RADEON X1650 Graphic Card

2 Answers

Looking to upgrade my graphic card one last time. Currently running a RADEON X850 AGP 8x. Dell XPS, 3 GHz Pent4 w/875P chipset.(800MHz Bus Clock, 400MHz DDR, Hyper-threaded (2)-- I would like the highest...


I wouldnt know whether you just like ATI Graphics cards, or it was recommended for you. But I would still give you my straight forward advice, and this is : Go for NVIDIA Ge-FORCE graphics cards. Trust me, you would thank me for it later.
I didnt want to recommend a specific model for you though, because of our difference in country locations, but just try and get a high memory (like 256MB and above), NVidia Graphics card that is compatible with your system. Also check out the available slot on your system that you will use for it first before you go (So that you wont go and get an AGP slot card when you have just an open PCI Slot). I'm telling you this because I've used A LOT of graphics cards also (Over 10 years now)! and I've come to that conclusion that NVIDIA makes the best graphics card.
Hope this helps you out.
Goodluck!

Jul 15, 2009 | ATI AGP8X (128 MB) Graphic Card

2 Answers

Powercolor x1650 512mb AGP problem


The one you bought is 16x but your MB supports only 8x..................sodeep

Jun 18, 2009 | Power Color 256MB PowerColor ATI RADEON...

1 Answer

My computer comes up with a black screen


try and start in safe mode
then see if your driver is correct in my computer property hardware devices

Jan 17, 2009 | ATI RADEON HD 2400 PRO Graphic Card

1 Answer

Is visiontek a radeon hd 2400 pro agp 8 compatible w/ p4s800- mx?


ATI has recently written some better drivers for the 2400 Pro AGP cards,... Make sure the setting in the BIOS for the motherboard is set to the AGP or PCI for primary video. For AGP, make sure that you have the power from the power supply connected to the video card. Make sure that your motherboard does support 8X AGP video cards. If you are not sure, please check with motherboard manufacturer for compatibility.

Dec 13, 2008 | VisionTek ATI RADEON HD2400 Pro Edition...

1 Answer

Graphics cards


Hi noxiney, you're MSI motherboard does have 1 opened AGP 8x4x slot. You can install & run the ATI Radeon X1650 PRO AGP. You can not run PCI-Express because there are no PCI-E slots on the board. There are PCI (White in color) on the board but the AGP slot is much faster than the PCI (White in color slots). The manual states the AGP card can only support 1.5volt video cards & not 3.3volt AGP cards. (Keep this in mind when looking for an AGP card).
Below is a link to a bunch of AGP 8x4x video cards. One or two include DDR2 memory. Carefull where you buy. Check the warranty. (Longer is better). The first one on the list would be compatible. Its not DDR2 but it does have 512MB of memory.
http://www.google.com/products?hl=en&q=AGP+ATI+Radeon+X1650+PRO&um=1&ie=UTF-8&sa=X&oi=product_result_group&resnum=1&ct=title

This card is 1.5v compatable.
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3101648&CatId=318
& this is compatable.
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1642902&CatId=318
Just remember, if the card can run both 8x & 4x it should support the 1.5volt needed to function on the MB.

Enjoy!

Mike

Jul 08, 2008 | MSI PM8M-V Motherboard

1 Answer

Intel P$ 1.8 mhz on a D845HV/D845WN board


Before removing your current card swap video outputs on the PC. If currently connected to the VGA output switch to the HDMI connector AT the video card. Use the HDMI to VGA adapter that came with the video card. Check & see if the display loads Pc starts. Taking the information directly from your motherboard manual pg. 25, your AGP video can only run at, AGP supporting 1.5 V 4X AGP cards. The 9600pro runs at 8x & it is not backwards compatible. (able to run at either 8x or 4x). You could run the Sappire ATI Radeon 256MB 9550 DDR AGP 4x/8x 1.5volt card.
Here is one site: http://www.colordrives.com/sapphire-ati-radeon-9550-256mb-ddr-agp-4x-8x-video-card---retail-box.html
When you do get the video card be sure to set your bios AGP to the correct size as listed in your manual pg. 109 subsection 4.4.7
I hope this helped.

Feb 20, 2008 | Intel Motherboard

Not finding what you are looking for?
ASUS P4S800D-X Motherboard Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...