Fuser problem, if it has low print/copy count try resetting it. Hit these keys in sequence clear modes,1,0,7,press and hold stop for 5 or so seconds you should see service mode. Turn it off (red switch) There is a tech bulliten on this. -Carl
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
thnaks real works,but first need to change thermostat.
thnaks
" - copymagen1
i can not print AR-M 161 for vista, i have parallel connection ,and i can not find GDI Driver for...
(More)
i can not print AR-M 161 for vista, i have parallel connection ,and i can not find GDI Driver for AR-M 161