Question about Philips VR540 VHS VCR

3 Answers

Vr540 philips the video won't play and an error code is on the display E2 what does this mean and is there any way to reset the video i have tried unplugging it. to no avail. thanks claire can ihave code for other remote control for philips vr540

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Error 2 and error 3 and error 4 are tech codes.
and if your unit won't reset, you can take it to your local
electronic repair shop. I had error 3 on my Phillips,
and he went to the PM webpage,researched it, and fixed it perfectly for $39.00 total. STILL WORKING!
He said it was some little thing to replace that took him 15 minutes.
If you don't want to buy one of the REALLY cheaply made vcrs or DVD/vcr combos that are out now, it worth a little phone time to find
an electronics repair shop. Or the new DVD recorders with vcr combos are very good, but sturdy ones are expensive.

Posted on Oct 31, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

- does it load a tape cassette?
- does it rewind or fast forward?
- unplugging it for at least 1 minute should reset the error code.
- if not, there is a serious circuit problem which is not likely worth repairing.

Posted on Dec 28, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 20 Answers

For reset philips VR540 to original settings: turn off vcr using "standby/on" button, press for 2 seconds or more "stop/eject" "programme "

Posted on Oct 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haier Wine Cellar, Dual model, displays EE error code and was heavily iced on the interior back.


If the refrigerator or freezer displays error code, request a technician to check, please call the service
Different series display different error codes.
The error codes for the refrigerator: F1, F2. F3, F4, F5, F6, F7, EO, E1, E2, E6, Er, Ed, an so on
The error codes for the wine cellar: F1, F2. F3, F4, F5, H1. H2, A1, A2, E1, E2, EE, HH, LL, and so on
Notice: If you power off then power on, maybe the error code disappear, but it will display again after a few hours.

Mar 27, 2018 | Haier Refrigerators

1 Answer

What does E2 code indicates on a Winchester brand ductless air conditioner?


Try turning the power off for 15 minutes.

Tech Tips: How to Resolve E1 and E2 Error Codes - YouTube

? 1:48
https://www.youtube.com/watch?v=COIxQBT-J2k
Oct 14, 2015 - Uploaded by MitsubishiHVAC
In this Tech Tips video, Jeff explains the E1 and E2 error codes, possible causes and some ways to resolve ...Missing: winchester ‎brand

Error Codes - Room Air Conditioner - LG

www.lg.com > Home > Support > Product Help > Help Library May 19, 2017 - An error code on the display of the room air conditioner can usually be ... P2 or FL; CH34; E1 or CH02; E2 or CH01; E3 or CH03; E4; E5; F1,F2, ...

Pioneer Air Conditioner AC Mini Split ERROR CODES And ...

https://removeandreplace.com/.../pioneer-air-conditioner-mini-split-error-codes-and-tr... Jun 19, 2017 - Pioneer AC Ductless Wall Mount Mini Split Indoor Unit Error Code = E2 What Does The AC Error Code Mean? = Zero-crossing signal detection ...

QSHX-242 24000 BTU Mini Split Air Conditioners With Multi-Fold ...

https://www.pinterest.com/pin/542894930052841690/
Panasonic S22NKU-1 Cooling Only Wall Mounted Ductless Mini Split ..... Room temperature, set point temperature and status codes are all indicated on the ... The Goodman brand is well known for affordable pricing covered by some of the ..... Winchester Air Conditioner Quick Connect System 4rac36q-30 - 36000 Btu 13 ...

Sep 27, 2017 | Heating & Cooling

2 Answers

How to unlock regional code of philips HTB3510 3d blueray player?


Check current region code
Open the Philips HOME Screen
Type on your remote: 8520
This will display all of the current settings for your player.
Example: Region_Code: DVD(2) BD(B)Change region code
Turn on player with no disk inserted
Press "Open/Close" on the remote control until the tray is open
Press 8689310 - 0 means all region
Press 8689311 - 1 means region 1,
Press 8689312 - 2 means region 2,
Press 8689313 - 3 means region 3,
Press 8689314 - 4 means region 4,
Press 8689315 - 5 means region 5,
Press 8689316 - 6 means region 6.
Now the front Buttons might not work!
Go to SETUP and click on RESET FACTORY SETTINGS
Wait until the player restarts and now you can play all DVD regions

Oct 08, 2014 | Philips HTB3510 5.1 3D Home Theater System...

1 Answer

What do codes e2 and f1 mean?


Here is what the manufacture says about it, my comments are below.

F1 E2 - UL A/D error(s)

1. Verify failure if not displayed, using CANCEL/OFF key. Press key for 5 seconds until last
error code is displayed.
2. Disconnect power longer than 30 seconds.
3. Re-apply power and observe for longer than 1 minute.
4. If failure remains, disconnect power, replace control.

Phil's comments----->

F1 Codes are related to the control itself, if there was a storm, power outage, surge etc it could have damaged the control. Try resetting the board by unplugging the range or turning off the breaker for a couple minutes. Restart and see if that helps. If not you will need to replace the control.

The part number for this unit is 4453614 and runs just over $300.00

Apr 25, 2010 | Whirlpool GR465LXLS Electric Kitchen Range

1 Answer

I am getting an E2 error on the display. The


either any of the key(button)is got stuck up prtessed or the motor of the washer is got weak.due to this e2 error code shows up.the washer works if the motor is weak but if there are more clothes in the washer and due to that motor cannot spin properly so it shows e2.First clean the washer internally after emptying it completely then check.if still e2 error then motor needs replacement . you can get new motor at www.repairclinic.com

Aug 30, 2009 | Amana Washing Machines

1 Answer

Whirlpool Oven Model RF365PXGN getting a error of F1 and E2


HELLO, I HAD THE SAME PROBLEM. ALL YOU HAVE TO DO IS FIND YOUR CIRCUIT BREAKER BOX AND LOOK IN IT FOR THE BUTTON THAT SAYS KITCHEN. TURN THE KITCHEN POWER OFF FOR 30 MINUTES THEN TURN IT BACK ON. ONCE YOU TURN IT BACK ON THE OVEN SHOULD RESET ITS SELF. TRY THAT AND IT SHOULD HELP.

Oct 31, 2008 | Ovens

2 Answers

Vr540 philips


E2 is not an error code. It means that the video tuner is set to EXT2 (Scart input 2)

Press the VCR button on the remote control, and try again.

Nov 17, 2007 | Philips VR540 VHS VCR

1 Answer

Philips VR540 video cylinder motor slowly go round. Why ?


Nope, the only thing you can do is make sure the cylinder motor has the proper B+ on it and replace the cylinder motor if the voltage is correct, but to tell you the truth a new unit would most likely be less expensive the a nes cylinder motor. hope this helps. Good Luck

Mar 21, 2007 | Philips VR540 VHS VCR

Not finding what you are looking for?
Philips VR540 VHS VCR Logo

1,611 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...