Question about Curtis SMP228 MP3 Player

2 Answers

My mp3 player won't format

I have plugged up my mp3 player and installed everything but on windows media player it says my player is filled so when i go to my computer and click mtp and explore,then it goes straight to the oter thing and i right click and press format but then it says it can't finish formatting what do i do,i have no clue about mp3 players

Posted by on

  • renea14_07 Dec 25, 2007

    pls...help a.s.a.p......I NEED PORTABLE MUSIC IN MY LIFE...

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

This may be caused due to damaged firmware but can be recovered by firmware upgrade. Click on the link given below to download the Firmware folder on your computer. When done, refer to file "procedure.doc", a Word file included in the Firmware folder, and follow the procedure to upgrade the Firmware of MP3 player. Download the Firmware folder at http://www.curtisint.com/html/custservice/manuals/CUR_MPS1015_FW-UPGRADE.ZIP

Posted on May 23, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have 2gb mp3 player there is no file but it shows 99% memory is used how ican used my 2gb

Posted on Feb 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I cant get the music to download


Hi Duane
Downloading Music to MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Bud

Oct 09, 2013 | Mach Speed Eclipse 180 MP3 Player

1 Answer

How do i download music from my i tunes library?


Hi angnumez03...

You will have to convert the format of all the itunes songs (ACC) into either WMA or MP3 to be able to play on your mp3 player. then once you have them converted you are going to have to install Windows Media Player and put the music that you want on yor mp3 player on the program.
Once you have all your songs on Windows Media Player then you will plug in your mp3 player and windows media player will recognize it and then you can highlight the music you want and download it to your mp3 player
Please take time to rate me thumbs up

FREE...Format converter... http://formatoz.com/

Windows Media Player...
http://windows.microsoft.com/en-US/windows/products/windows-media-player

Sep 18, 2011 | Philips GoGear Ariaz MP3 Player

1 Answer

Transferring cds on to the philips mp4 player?


Hi
NOTE: When downloading music to MP3 Player make sure your using the right format for your player.
**********************************************************************************************************

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Please take time to rate me 4 thumbs up.

Sep 13, 2011 | Audio Players & Recorders

3 Answers

How do you add songs on device


Hi atiug b...
Downloading Music to MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Free Answer...Please take time to rate me

Jun 11, 2011 | SanDisk Sansa Clip MP3 Player

1 Answer

How can I remove slotradio from my sansa


i up greated my sansa fuze 8 gb music/ video player just wanted the sansa media player and it installed the slotradio firmware tried formatting the player with windows media player format just wanted the media converter cant ,t remove this slotradio from the menu image won,t erase anybody!!!!

Apr 06, 2010 | SanDisk Sansa c140 MP3 Player

1 Answer

Reformating


Reformat in Windows Media Player instead.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.

Apr 06, 2008 | Siren Edge MP3 Player

1 Answer

Mp3 player severe help


There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

Mar 09, 2008 | iLO MP3 Player

1 Answer

Can't gat cd to install.


You don't need a lot of the software - some of it is defunct. Make sure you have windows media player, and that your computer recognizes the player, and then you are good to go.

The following procedures will erase all songs on the player.
Check if the file system is NTFS. If yes ,format it to FAT or FAT32. - Connect player to computer, click my computer, right click on icon of mp3 player and select format.
You can also format the player in Windows Media Player tiself.
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
You may also want to check
http://support.rcaaudiovideo.com/downloads.aspx?product=25
for any firm updates - the above procedures in some cases undo the original formatting on the player, and a firmware upgrade will be required to replace the Mp3 player's formatting.
-Tha Mp3 Doctor

Jan 27, 2008 | RCA TH1101 MP3 Player

2 Answers

I don't know what to do


plug in your mp3 player, go to "my computer" then click on the opal icon thingy, after that there will be an icon that will say internal storage right click on that and click format. it should format!

Jan 23, 2008 | RCA OPAL M4001 MP3 Player

1 Answer

Scandisk 1gb


There could be several issues here.

Is the computer showing the Sansa as plugged in?
Does Windows Media Player show the Sansa as plugged in, or does WMP say "Please Connect a Device"?

Are you running Windows Vista or windows Media Player 11? If so, grab the Firmware update from Sansa's website at: http://www.sandisk.com/Retail/DriverDownloads.aspx

If the player keeps freezing while plugged into the computer, you may need to Format the player in Windows Media Player 11 after performing the firmware upgrade. This will erase all of your songs off the player, so you will have to reload them. But your player will work fine after that.

Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.

-Tha Mp3 Doctor

Jan 15, 2008 | SanDisk Sansa c200 MP3 Player

Not finding what you are looking for?
Curtis SMP228 MP3 Player Logo

Related Topics:

1,385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Curtis Audio Players & Recorders Experts

Computer Links

Level 3 Expert

2386 Answers

NOEL
NOEL

Level 3 Expert

8386 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Curtis Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...