Question about D-Link DP 301P (DP-301P) Print Server

1 Answer

No printing threw terminal service

D-Link DP 301P Print Server been configured correctly with XP system but traying to print using terminal services without any luck

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers
Re: No printing threw terminal service

Do you have the options set correctly on the remote computers assistant to use local devices

Posted on Dec 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have connected the d-link to a KOT printer,my network cannot find the server.And according to the manual I cannot browse the default ip of the DP-301P+ sever.please assist me immediately.

I have D link DP- 301P Print server I am using it in Epson M188D Printer for KOT Printing but its shows some times printer not found on network, please help me to solve the problem.

Mar 22, 2011 | D-Link DP 301P (DP-301P) Print Server

1 Answer

I have print server DP-301U Pls let me know the default IP address for configuration

As far as I can remember the default IP is 192.168.0 .10, subnet
If this isn't the correct IP address, you'll need to reset the d-link print server Hope this helps
Regards, c0d3

Feb 09, 2011 | D-Link DP 301P (DP-301P) Print Server

1 Answer

Hi sir how can i change ip address for Dlink printer server DP-301P+

Logon to the Print Server web configuration and begin managing the DP-301P+, simply launch the browser (e.g. Internet Explorer) and type dlink-xxxxxx, where xxxxxx are the last six digits of DP-301P+'s MAC address. The MAC address can be found on the bottom side of
the DP-301P+ device.


Default IP Address of DP-301P+ is set as automatically getting from DHCP server or Router with build-in DHCP server. Please note that the PC's IP Address must be in the same subnet as the print server's IP Address for the two devices to communicate. (For example, if print server's IP
Address is, with a subnet mask of, then your computer's IP Address should be 192.168.0.x, where x is a value between 1-254, excluding 10.)
For additional information, please refer to Dlink printer server DP-301P+ Product Manual

Let me know if any further clarification/ assistance is required.

Good Luck!
Appreciate generously, if the solution could have been of any help!

Jan 11, 2011 | D-Link DP 301P (DP-301P) Print Server

1 Answer

No light at all including power light

Check your power supply. If the transformer box is cold and the outlet has power, you'll need to replace it. You will need DC 5V, 2.5A and the correct adapter. Thus check with Dlink if your print server is still under warranty.

I hope this helps.

Cindy Wells

Dec 11, 2009 | D-Link DP 301P (DP-301P) Print Server

2 Answers

How to reset the administrator password of the D-Link DP-301P+

i forgot password Printer Server D_link Dp-301p
Please Help Me

Jul 30, 2009 | D-Link DP 301P (DP-301P) Print Server

1 Answer

I would know if D-Link DP 301P Print Server supports SNMP protocol because i need to print from IBM iseries thank you

It supports all below protocol so you can give print from IBM iseries .

TCP/IP Protocols Supported :
  • SNMP
  • Telnet
  • TFTP
  • FTP
  • LPD
  • RARP
  • DHCP

Jul 28, 2009 | D-Link DP 301P (DP-301P) Print Server

1 Answer


By default the DP 301P+ does not come with a password. If there is one installed (and you don't know what it is), you can reset the device to factory defaults from the Tools menu in the web configuration utility. Be aware that you will lose all settings in the print server when you do this.


Nov 17, 2008 | D-Link DP 301P (DP-301P) Print Server

1 Answer

DP-301P+ Express EtherNetworkTM Fast Ethernet Print Server

You need to connect to it (using the broswer at the PC of same LAN with the current ip of the print server). Then click on Tools TAB, click on "Reset" at left. You should see "Do you want to restore this device to factory default setting?". Click on "Apply"

Jun 04, 2008 | D-Link DP 301P (DP-301P) Print Server

1 Answer

Forgotted the Ip of D-Link DP 300U print server

You may use the PSAdmin software to configure your print server even if you don't know the IP address. The only requirement is that the DP-300U has to be in the same network (subnet) as your PC running PSAdmin. In the PSAdmin, you will then be able to view or change the IP address.

Here is the link to download PSAdmin:

Remember that if you also have forgotten the Admin password, you will have to ship the unit to D-Link in order to have it factory reset.

May 10, 2008 | D-Link DP 301P (DP-301P) Print Server

Not finding what you are looking for?
D-Link DP 301P (DP-301P) Print Server Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Print Servers Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Martin Murray

Level 3 Expert

1614 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a D-Link Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides