Question about GoVideo DV2150 DVD Player/VCR

1 Answer

No picture on vcr playback

Are there any suggestions for this problem? DVD works, audio plays on vcr playback, but there is no picture.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 221 Answers
Re: No picture on vcr playback - GoVideo DV2150 DVD Player/VCR DVD & Blu-Ray Players

Clean the heads

Posted on Dec 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How can I set the channel BACK to CH 3 from CH 4

1) Set your TV to channel 3.
2) Insert a pre-recorded tape into this unit.
3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.
• If noise appears on the TV screen, press the VCR/TV button on the remote control.
4) Press the PLAY button once.
5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.
• The RF output channel will change to channel 3 from channel 4 and you will see a playback picture.
• When a picture does not appear on the TV screen, repeat step [4].
6) Press the STOP button to stop playback.

Nov 17, 2007 | Emerson EWD2004

2 Answers

Bush dvr3006 will play audio disks but wont play any dvd ! just says load for ages then turns off or no disk ! help please ?

These are the formats your DVR will or will not play.
  • Blu Ray Playback: No
  • Blu Ray Recording: No
  • Compact Flash Card: No
  • DTS Decoder: No
  • DVB-C: No
  • DVB-S: No
  • DVB-T: No
  • DVD Audio Playback: No
  • DVD Player / Recorder: DVD Recorder
  • DVD+R Playback: Yes
  • DVD+R Recording: Yes
  • DVD+RW Playback: Yes
  • DVD+RW Recording: Yes
  • DVD-R Playback: Yes
  • DVD-R Recording: Yes
  • DVD-RAM Playback: No
  • DVD-RAM Recording: No
  • DVD-RW Playback: Yes
  • DVD-RW Recording: Yes
  • DVI Interface: No
  • DivX Playback: No
  • Double Layer Recording: No
  • Electronic Program Guide (EPG): No
  • Ethernet: No
  • Firewire IEEE-1394 Interface: No
  • HD-DVD Playback: No
  • HD-DVD Recording: No
  • HDMI Interface: No
  • HDTV: No
  • IPTV (Internet Protocol Television): No
  • Integrated VCR: No
  • MP3 Recording: No
  • MPEG4 Recording: No
  • Memory Stick: No
  • Multimedia Card: No
  • Number of Scart Interfaces: 1
  • PCMCIA Interface: No
  • Progressive Scan: No
  • Real Dolby: AC3
  • Secure Digital Card: No
  • Show View: No
  • Smart Media Card: No
  • Super Audio CD Playback: No
  • Super Video CD / Video CD Playback: No
  • Table / Portable: Table
  • USB Interface: No
  • W-LAN Connection: No
  • xD-Picture Card: N

May 24, 2014 | DVD & Blu-Ray Players

1 Answer

Sansui DVD/VCR remote control issue, VCR works/DVD does not-black

There should be a DVD/VCR button on the remote control which will toggle the machine from one playback source to another. If she has pressed the VCR button then the machine will only playback tapes & not show DVD's. Press this button & the DVD's should play. If you look closely at the front window of the machine it will show what mode it is in ie VCR or DVD, set this for the DVD to get it to play.

Sep 16, 2009 | Sansui VRDVD4000 DVD Player/VCR

1 Answer

Playback Problem

open the recorder, 4 screws at each corner, wipe the playing head and the voice reccognition head, to the right of the playing head head with a baby wipe, you will be amiazed what **** comes off it. DON'T scrub it just wipe lightly, spin the playing head so it's clean. If you have a lint free cloth ( a glasses cleaning cloth you get in the case is brilliant) Try the tape (before you put it in make sure everything is DRY!) and your problem should be solved. It worked for me! and that came from a TV engineer

Jul 15, 2009 | Toshiba RD-XS25 DVD Recorder/HDD Recorder

3 Answers

Magnavox DV220mw9 won't record from Tv, hard to connect

check out this diagram, paying close attention to the audio video cable hookups.

assume the cable tv box represents the converter box

you are going to come out of the converter box audio and video outputs into the new magnavox dvd/vcr combo audio and video inputs.

Then out of the new magnavox dvd/vcr combo outputs to the inputs on the tv if it has such inputs. The TV will have to operate on the video input 1 or 2 if the tv has such a thing, use the remote for the tv to adjust the input signal to line in 1 or 2 depending on what it has.

If the tv has no coaxial input or audio video inputs then you might have to use an adapter, you can get these from radio shack.

You say it will not record from the tv, but in all actuality the dvd vcr combo is getting the signal from the converter box not the tv, do you understand what I mean here?

So the dvd vcr combo gets input from the converter box so you will have to set it to view signal from the line input you have plugged in from the converter box. line 1 or 2 or whatever the input is.

the tv will have to be set on the line input to view the signal from the dvd vcr combo.

That is as easy as I can put it. Study the diagram closely. You will see what I mean.

Mar 07, 2009 | Philips Magnavox DVD/VCR Dual Player

2 Answers

Pictue but no audio on VHS playback..VHS record to DVD visual/no


please check the format settings, maybe the audio is not in good settiongs!~


Feb 01, 2009 | RCA DRC8300N DVD Recorder/VCR

1 Answer

Go video VR4940 VCR video recording has sound but no picture

You can try cleaning the video tape heads. The vcr has 2 different heads. One for audio which is fixed and a drum head for video with 2 heads on it that rotate. The best way to clean them is to take a lint free cloth ad wrap it tightly around your finger. Put some alcohol on the cloth and place it on the drum. Then rotate the drum as you hold your finger against the drum. DO NOT move your finger up and down as you can brake the head off. The other option is to go buy a head cleaning stick. It's a piece of chamie on a plastic tongue depressor. I've cleaned hundreds of them with my finger though. You can clean the whole tape path with the rag. Good Luck.

Nov 30, 2008 | GoVideo VR4940 DVD Player/VCR

1 Answer

Remote problem

Hi There,

On the front panel:

REV Button (DVD)
Press to view the DVD picture in fast reverse motion
or to reverse playback of an Audio CD.
Press to skip Chapters or Tracks.

FWD Button (DVD)
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
Press to skip Chapters or Tracks.

I hope this helps,.
If not, feel free to conact me.


Nov 03, 2008 | Emerson EWD2203 DVD Player/VCR

1 Answer

Vhs playback problem

either extremely dirty heads or there is a tv/vcr button that needs to be toggled. Most have auto tracking, old ones have a knob or 2 buttons under a panel somewhere for tracking.

Dec 02, 2007 | Panasonic DMR-ES30VS DVD Recorder/VCR

Not finding what you are looking for?
GoVideo DV2150 DVD Player/VCR Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top GoVideo DVD & Blu-Ray Players Experts


Level 3 Expert

56925 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

4518 Answers

Are you a GoVideo DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides