Question about Westinghouse LTV-27w7 7 in. LCD HDTV

3 Answers

Westington LTV-27w7 HD black screen

Whenever i turn on my tv its just a black screen with no audio or video. it has been doing this for 2 days, before i can just turn off the tv for a few minutes and turn it back on and everything will work but then within 5 minutes it goes back to the black screen. Now whenever i turn it on its just a black screen. Help?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: westington LTV-27w7 HD black screen

If the power light stays on green, I would look tward a backlight issue. If you can see any image at all then the backlight controler or the backlights are bad. If there is nothing then if could be a power supply overheating or an inverter failure. More than likely as the unit heats up a failed solder connection is loosing contact causing the screen to go black.

Posted on Feb 10, 2008

Re: westington LTV-27w7 HD black screen

Are you sure thats it? im pretty sure that everythings plugged correctly. some people have said that perhaps its fried?

Posted on Dec 30, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers
Re: westington LTV-27w7 HD black screen

ICheck the power supply connections make shure tht the plugs are seated correctly. The power supply isreplaceable as a complete uitand you have to return a repairable unit.
Allied electronics

Posted on Dec 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

3 channels missing

Those channels all are related in the same tuning band that most tuners have----suspect you have a bad tuner--unless you are using a box in which case suspect the box is the issue.

If the tuner is the problem there are ways around that--used a cable box set to the rear inputs (audio/video) on your set and bypass the problem.

Jun 01, 2012 | Westinghouse LTV-27w7 7 in. LCD HDTV

2 Answers

40 in westinghouse LTV_40

  1. Hold down the Menu and Menu up/scroll (+) buttons simultaneously on the Apple Remote for 6 seconds.
  2. TV will cycle through all of the available resolutions, displaying each for about 15 seconds. Please wait, as it may take up to 2 minutes before a compatible resolution is found. If the display is incorrect or doesn't show up, keep waiting while TV continues to try and find a compatible resolution.
  3. When a picture appears on the screen, navigate to OK with the remote and press the Select/Play/Pause button.
If you think you selected the wrong resolution, repeat these steps again. TV works much better in HD resolutions such as 720p or 1080i. You should choose the 'best' resolution your TV supports.
If HDMI or DVI connections are available on your TV, you can use them instead of component video to avoid this process

Jun 28, 2008 | Westinghouse LTV-27w7 7 in. LCD HDTV

1 Answer

How can i get service manual for westinghouse tv model 42B 8000 series 7

Try to go this link it might help

Jun 25, 2011 | Westinghouse LTV-27w7 7 in. LCD HDTV

1 Answer

Westinghouse LTV-27w7 HD 7 -- after a storm - the tv was the only thing affected in the house. The light comes on when the power is turned on, yet nothing else comes on - no picture and it will not turn...

same thing happened to my lcd. I had it checked out and the specialist said it needs a new motherboard. You can order one @ for under $200. Just swap it out. Hope this helps

Aug 14, 2010 | Westinghouse LTV-27w7 7 in. LCD HDTV

1 Answer

My Westinghouse LTV-27w7 Black out

the high voltage circuit is shutting down.
the two most common faults are the flyback transformer,and an overvoltage condition from a blown regulator.
both are repairs where the tv is thrown out.
the days of the loose wire are gone.

Aug 22, 2009 | Westinghouse LTV-27w7 7 in. LCD HDTV

2 Answers

I can't get my tv to stay on

Bad capicitors in power supply just fixed it in my tv

Mar 27, 2009 | Westinghouse LTV-27W2 27 in. HD-Ready LCD...

1 Answer

LTV-37w2HD37"Flat PanelLCD HD TV

It is fixable, but at a huge cost. A new panel can cost more than the TV. You might be able to find one with a good panel used on Ebay though.

Jul 13, 2008 | Westinghouse LTV-27w7 7 in. LCD HDTV

2 Answers

Westinghouse LTV-27w7 HD TV, two yrs old, blueish square flashing on & off, no picture.

if you have warranty work they will direct you to the service center you will need, I do not know of any bb that service tv's.

May 08, 2008 | Westinghouse LTV-40w1 HDC 40.02 in. LCD...

11 Answers

Westinghouse lcd tv parts


Jan 20, 2008 | Westinghouse LTV-27w7 7 in. LCD HDTV

1 Answer

LTV-27w7 blackscreen

Have you tried unplugging overnight? Sometimes mine gets screen garbage and that clears it up. Of course, now it says "Auto Scan Required" every time I power up. Maybe I should've grabbed that after Xmas 32" at Fry's for $400.

Dec 25, 2007 | Westinghouse LTV-27w7 7 in. LCD HDTV

Not finding what you are looking for?
Westinghouse LTV-27w7 7 in. LCD HDTV Logo

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66537 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Westinghouse Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides