Question about RCA F25654BC 25" TV

2 Answers

No video display but with sound - RCA F25654BC 25" TV

Posted by on

  • Anonymous Jun 24, 2008

    have sound, but not video.  Black screen.


    Tried everything on "menu" to no avail.


    I did not receive a User's Guide when purchased.

  • Anonymous Jan 22, 2009

    My samsung HLR5087W is only 3 years old. It's the Tower model,looses picture but has sound. Replaced bulb,color wheel, checked fans and cleaned OK,tech said it was a main board after he diagnosed the wheel. Cost is about $550.00. I'm scared to spend that if it could be something else minor.After misdiagnosing and $130.00 service charge and the money invested in the other parts, I sure would like to fix. Can anyone HELP!!! Jeff

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The only way to solve this problem is

THERE IS COLD SOLDER ON THE VERTICAL IC OR THERE IS ONE SWOLLEN CAPACITOR RIGHT NEXT TO THE IC...IT WILL BE ELECTROLYTIC

Posted on Feb 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

Hi there, most video problem are in crt board. a resistor with 100 k ohms or up is defective, some of its troubles is in video section, an ic maybe. try to chek some electronic parts. ty

Posted on Dec 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display problem


Video section is corrupted and only a replacement video circuit board will fix the TV. Audio is Separate from the Video...that is why you get sound and no video.

Dec 20, 2013 | Televison & Video

1 Answer

I cannot get any sound through my tv from my acer ao531 notebook i have a picture but no sound


Try these options
1. Click on sound icon in Taskbar and make sure sound is up on HDMI volume. If this doesn't exist-
2. Start => Control Panel => Hardware and Sound. Under Sound tab click on Manage Audio Devices, right click on HDMI tab and enable. Or this: Computers have two seperate systems - one for video and one for sound.

The only computer (or laptop) connection that carries both video and sound is HDMI. If you do not have a HDMI/DVI connector on the back of your computer, then you will have to use the VGA-composite or s-video connectors to display your PC's output on an external monitor like an LCD TV.

On both my HP and Dell laptops the display settings (Start/Control Panel/Personalize/Display Settings) allow two modes - single or dual monitor mode. Single monitor mode allows me to switch between any one of three possible video outputs - VGA-composite, S-Video or laptop screen, or a split-desktop (display spread over two seperate monitors). Dual monitor mode allows the same display on any two of three possible video outputs.

Switching is performed using the fn keys on the keyboard (fn key plus the F2, F8, etc. function key with the display marking). You guys use single monitor mode until you figure out what your are doing. Select VGA-composite or S-Video.

Non-HDMI sound to your TV monitor or sound system must be obtained from your laptop's Headphone or S/PDIF jacks. Headphone is stereo and S/PDIF is 5.1 surround sound. Headphone is electrical, but S/PDIF may be electrical or optical (laser light). You must set the sound jack that you intend to use as the default on the PC control panel (Start/Control Panel/Sound).

None of these connectors is two-way in the context of an LCD monitor - your PC cannot record a TV picture or sound from the external monitor. To accomplish this you must purchase a video converter box that converts cable TV or video+sound inputs to USB format usable by your laptop. Do this and you can turn your laptop into a Tivo recorder/DVD burner using Beyond TV, Sage TV or a variety of other software packages.

Mar 10, 2011 | Computers & Internet

1 Answer

How do I get my Insignia 42" to show movies from my PC using an S-video cable?


Make sure your S-Video is hooked up.

Now navigate your way to the Display options.

Now either extend your monitor to fit your TV or move the primary display to the TV. Also make sure your input on your TV is set to S-video.

That should move your display settings to your TV. Also do the same thing for your sound if your computer still plays the sound.

Just go to your sound options and make sure your TV S-video is set to default sound and it should chance from your computer to your TV.

Aug 22, 2010 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

Xbox 360 Console: xbox 360 video not displaying but sounds works...


make sure the color cables a fastened tightly in the t.v.

May 18, 2010 | Microsoft Xbox 360 Console

1 Answer

Cant get any sound on tv


Hello,

The only computer (or laptop) connection that carries both video and sound is HDMI. If you do not have a HDMI/DVI connector on the back of your computer, then you will have to use the VGA-composite or s-video connectors to display your PC's output on an external monitor like an LCD TV.

On both my HP and Dell laptops the display settings (Start/Control Panel/Personalize/Display Settings) allow two modes - single or dual monitor mode. Single monitor mode allows me to switch between any one of three possible video outputs - VGA-composite, S-Video or laptop screen, or a split-desktop (display spread over two separate monitors). Dual monitor mode allows the same display on any two of three possible video outputs.

Switching is performed using the fn keys on the keyboard (fn key plus the F2, F8, etc. function key with the display marking). You guys use single monitor mode until you figure out what your are doing. Select VGA-composite or S-Video.

Non-HDMI sound to your TV monitor or sound system must be obtained from your laptop's Headphone or S/PDIF jacks. Headphone is stereo and S/PDIF is 5.1 surround sound. Headphone is electrical, but S/PDIF may be electrical or optical (laser light). You must set the sound jack that you intend to use as the default on the PC control panel (Start/Control Panel/Sound).

None of these connectors is two-way in the context of an LCD monitor - your PC cannot record a TV picture or sound from the external monitor. To accomplish this you must purchase a video converter box that converts cable TV or video + sound inputs to USB format usable by your laptop. Do this and you can turn your laptop into a Tivo recorder/DVD burner using Beyond TV, Sage TV or a variety of other software packages.

Please let me know if you have any further questions or concerns.
Thanks.

May 07, 2010 | HP Compaq Presario C700T

1 Answer

When i connect my laptop to the tv i get sound but no pic.


Computers have two seperate systems - one for video and one for sound.

The only computer (or laptop) connection that carries both video and sound is HDMI. If you do not have a HDMI/DVI connector on the back of your computer, then you will have to use the VGA-composite or s-video connectors to display your PC's output on an external monitor like an LCD TV.

On both my HP and Dell laptops the display settings (Start/Control Panel/Personalize/Display Settings) allow two modes - single or dual monitor mode. Single monitor mode allows me to switch between any one of three possible video outputs - VGA-composite, S-Video or laptop screen, or a split-desktop (display spread over two seperate monitors). Dual monitor mode allows the same display on any two of three possible video outputs.

Switching is performed using the fn keys on the keyboard (fn key plus the F2, F8, etc. function key with the display marking). You guys use single monitor mode until you figure out what your are doing. Select VGA-composite or S-Video.

Non-HDMI sound to your TV monitor or sound system must be obtained from your laptop's Headphone or S/PDIF jacks. Headphone is stereo and S/PDIF is 5.1 surround sound. Headphone is electrical, but S/PDIF may be electrical or optical (laser light). You must set the sound jack that you intend to use as the default on the PC control panel (Start/Control Panel/Sound).

None of these connectors is two-way in the context of an LCD monitor - your PC cannot record a TV picture or sound from the external monitor. To accomplish this you must purchase a video converter box that converts cable TV or video+sound inputs to USB format usable by your laptop. Do this and you can turn your laptop into a Tivo recorder/DVD burner using Beyond TV, Sage TV or a variety of other software packages.

Feb 11, 2010 | Dell Studio 1537 Laptop

1 Answer

Video picture won't display


convert your video. use a video converter with nokia compability to do this

Nov 27, 2009 | Nokia 6085 Cellular Phone

1 Answer

No sound,no video,front panel display will display.harman kardon


Check your audio settings on the main menu of the receiver. The audio input should be set to "auto" Next, make sure you don't have the unit in "6 channel input" mode or "direct" mode. This is usually a small button on the front panel. If you check all this and you still have a problem, post a comment and I will help you troubleshoot some more. Hope this helps

Jun 30, 2009 | Harman Kardon AVR 140 Receiver

1 Answer

No display info on receiver


Try plugging a video monitor AKA your TV into that monitor output connector on the rear of the yamaha.
Select video in on the TV and see if anything shows up from the yamaha

Sounds though like the receiver has serious issues. If you can get your moeny back , do so

Feb 24, 2008 | Yamaha RX-V661 Receiver

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...