Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F11 Code The F11 code keeps appearing when my washer is going through it's cycle. Most of the time it happens near the end. Just wondering what to do it's driving me crazy!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Plug off the wall. Shaking & vibration of your washer causes circuit board connections to become loose; due to faulty manufacture. Remove the 3 or 4 screws from the back & take off the top cover to secure the connections, make sure they are tight. This applies for the F11 & F dl codes. Dont forget to rate me &, merry xmas!

Posted on Dec 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cycle will not spin and drain properly near end of cycle. Keep getting F11 fail codes when I try resetting my kenmore elite HE 3t any suggestions?


Hi Shaun, I just found (and watched!) a good youtube video which may help with your problem regarding the F11 code, link follows below.
Trust this helps, best regards Alan
Troubleshooting and Repairing the F11 Error Code in Whirlpool Duet Washer

Feb 12, 2015 | Kenmore Washing Machines

4 Answers

F11 code flashing-washer stops


hi!!!!

try to unplug it end then check the control timer if it is broken !!!!

or open it if you know and fix it may be the spring that pull back the pause botton
might be broken go check it?

Sep 19, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

When the washer goes into spin cycle, it makes a very loud noise and then the spin cycle stops and F11 appears on the screen


This just happened to me tonight too - but I ddint get the F11 code.
When I stopped the machine, there were small plastic threads everywhere and when I investigated - the white plastic ring that is covered by the gasket - if you pull the gasket back you can see it - was shredded! I am afraid of the cost to fix this one. My machine is about 7 years old. Is it fixable - or should I give up?

Jun 28, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

What does f 11 indicate. The wash gets to the end of the cycle but F11 then appears and the door will not open.


F11 - Pump cannot be activated
f11 lights 1&3&4, pump/draining error
this means an open circuit pump or fauty pcb

Nov 28, 2010 | Hotpoint Aquarius WD640 Front Load...

2 Answers

F11 code on kenmore frontload washer HE3t


My f11 code is repaired! I got a clamp from Home Depot put it on the ccu unit on the right side tightened it shut and haven't got the stinking f11 code ever since. No more banging it again! I can finally do my wash without the horror beeping sound going off every time.

May 23, 2010 | Kenmore Washing Machines

2 Answers

Stops on spin cycle and gives a f11 error code


F11 is a serial communication error. Communication between the main board and the motor control board is not being sent correctly. This could be a bad main board, motor control board or motor itself. The testing can get pretty involved. Try putting the machine in a self test mode and see if the error clears. Press Cancel, then by pressing the drain spin button once on the left side then move to the spin speed button the the right. Press this button until no-spin lights. Press the prewash button 4 times. C00 should appear in the display. Let it run it's tests, there will be 8 of them and end up on C08. If this doesn't work, it's best you wait for the service tech.

Mar 29, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

F11 flashing kenmore he washer


The F11 error code indicates a serial communication failure. This happens when the 2 main control boards are unable to communicate with each other. This is either caused by a loose wiring harness connection or one of the control boards is defective. Good luck and please rate FixYa!

Dec 28, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

F11 CODE


you have bad communication ,,between the control board and themotor control board..,,check for a lose harness at booth ends

Dec 28, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2694 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...