vacuum won't pick up -- I've checked the bag, hose...and it seems to have no sucking power. The internal hose may be jammed (I vacuumed up a lot of shredded paper), but nothing as far as I can stick in fingers in. I don't have a metal coat hanger to slip down, but I'm afraid that might tear the hose and then the darn thing won't work anyway. :o(
I replaced the power switch on my G4. Got all my wires right and the unit ran fine on my workbench....
(More)
I replaced the power switch on my G4. Got all my wires right and the unit ran fine on my workbench. After I put the machine fully back together with bag etc. it would not run. I reset the bag collar suspecting it was not engaging the safety switch, but that did not work. Broke the machine down again and put it on the work bench. I tested the switch again and it started. Shut it on and off a number of times and it was running fine. This morning I went to turn it on again prior to assembly and I can't get it to turn on at all. Any suggestions....very annoying.
I can't seem to get the pieces to fit back together. everytime I tried to use it everything fell...
(More)
I can't seem to get the pieces to fit back together. everytime I tried to use it everything fell apart.