Question about Intel Desktop Board D845EPIL Motherboard

7 Answers

Emachine T2742 MB D845EPI/D845GVSR

I had a probelm with the A drive and had to remove the front panel to replace it. I mistakenly removed three connectors from the MB & did not notice were they went. They are as stated PWR Led (blue/white)/ HDR Led (red/white) & PWR S/W (black/white) they connect to a nine pin area J9G1. I have tried diagrams from the Intel site but to no avail. I am not able to power on my childrens Pc, please I need help. Or could it be something else? The green light is on when it is connected to power, FYI.

Posted by on

  • 7 more comments 
  • hnml771 Jan 02, 2008

    PC will not power up. Removed P/S and had it tested, it is okay. Also tested push button (ON/OFF) switch (momentary) this also test okay. Is there something on the mother board I can replace to fix this problem????

  • Anonymous Jan 19, 2008

    eMachine T2742 will not turn on! I replaced the Power Supply and I am able to see the green light shine on the motherboard which is a step in the right direction. But it will not turn on when I hit the button, I removed the color wires going to the motherboard and replaced them. My next step is to check the on off switch in the front.

  • Anonymous May 26, 2008

    I had a probelm with the A drive and had to remove the front panel to replace it. I mistakenly removed three connectors from the MB & did not notice were they went. They are as stated PWR Led (blue/white)/ HDR Led (red/white) & PWR S/W (black/white) they connect to a nine pin area J9G1. I have tried diagrams from the Intel site but to no avail. I am not able to power on my childrens Pc, please I need help. Or could it be something else? The green light is on when it is connected to power, FYI.

  • Anonymous May 29, 2008

    I mistakenly remove the connector(power switch, HDD LED,and Power Led) from 9 pin MB connector which have no label and I dont know which is which.



    Thanks

    Joe

  • Patrick18960 May 30, 2008

    This is freaky as I too have lost the ability to turn the PC on - they (emachines / gateway) "made" me buy a new powersupply but this doesn't fix the problem and in the process I too have removed these 3 pins (thinking they were connected together) and now don't knmow which is which...hope someone can help



    Thanks



    Patrick

  • conrads545 Jan 24, 2009

    I need the wiring diagram for this board.
    Will it be possible to email me.

    thanks for the help

    Regards

    conrads@maxiprest.co.za

  • smokering67 Feb 08, 2009

    I was given an emachineT2742 that would not turn on. I replaced the power supply, and that did nothing. I replaced the power switch, but still nothing. If anyone has an idea other than a fried motherboard, I would sincerely appreciate the feedback.

  • Anonymous Apr 29, 2009

    The wiring on the panal header J9G1 has come off in transit, I can't get the PC to power up, I can get the red LED light on front panal to come on, but can you tell me the correct order I should put the other colour wires.

  • Anonymous May 11, 2009

    mistakenly remove the connector(power switch, HDD LED,and Power Led) from 9 pin MB connector which have no label and I dont know which is which.D845EPI/D845GVSr



×

Ad

7 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The diagram for that 9 pin J9G1 is alongside the CMOS battery.

Posted on Dec 26, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I had the dead PS/MB problem on the emachine T2742.

Intel® Desktop Board D845GVSR Manual (Product guide)
http://download.intel.com/support/motherboards/desktop/D845GVSR/SR_English.pdf

If you want to purchase a new MB or MB w/processor at a reasonable price, I found this site >

http://oemxs.us/shopping/index.php?target=products&mode=search&subcats=Y&type=extended&avail=Y&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&q=BOXD845GVSR

F.Y.I., any standard ATX power supply @ 250W or better should work in this box. I picked mine up at a swap meet for $5.00.

Hope this helps!

-Larry

Posted on Apr 05, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

Set jumper on cmos to 2 and 3 when computer is off.when boots press f10 and save.turn off computer and put the settings back to 1 and 3

Posted on Feb 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 482 Answers

You should be able to mach them up if not turn off computer and hook them up anywhere and turn back on till you find where it goes.

Posted on Dec 25, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Intel Desktop Board D845EPI/D845GVSR
computer turn off jumper norma?
pls solution my computer.

Posted on Aug 11, 2009

Comment by Guest, posted on Jan 19, 2008 eMachine T2742 will not turn on! I replaced the Power Supply and I am able to see the green light shine on the motherboard which is a step in the right direction ..i HAVE THE SAME PROBLEM..WHERE CAN I GET A NEW MOTHERBOARD? PLEASE ADVISE ME TO FING IT

Posted on Feb 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the capacitors near the fan. I had the same problem and saw that the capacitors had overheated.

Posted on Mar 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an emachines t3958 w/ intel d845epi/d845gvsr, it will not turn on. i have replaced the power supply, and i believe everything is plugged in correctly. help!


Hi there,
Do any fans or lights come on?

Here's things I'd check:
-Replace Power supply (You already did this)
-Try a different AC outlet, remove any surge protector
-Remove the Power Button Cable from the MB and short those pins
with a screw driver just for a second.. (to eliminate a bad power button)
-Verify that the Power button is connected to the correct place.
-Verify the voltage selector on the Power supply is set to 115V (if that's what you have)
-Verify the Power supply's additional switch is set to on (if it has one on the back)
-Verify the CPU is seated correctly and securely.
-Verify there is no metal screws or anything like that sitting on the motherboard.
-Verify that the extra 4 Pin 12V connector is connected (if present on
this MB)
If none of this works, the motherboard might be dead.
Good luck!

Jan 10, 2010 | E-Machines Computers & Internet

1 Answer

D845dpi motherboard manual needed


See if this helps. It's for the D845EPI, and I know it's not the DPI, but that's closer than the D845gvsr.

Sep 11, 2009 | Intel Desktop Board D845EPI Motherboard

2 Answers

I have a emachine PC. PowerSupply blew up. changed it still down


try to remove the memory and put it back again make sure put it fit and correctly

May 28, 2009 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

Emachine T2885 won't start up after I cleaned it with vacuum


unplug and remove the ram and battery remove the jumper on the clear mos for 5minutes Put everything back together make sure everything is seated firmly

Apr 12, 2009 | Intel Motherboard

2 Answers

Can u possibly tell me where i might be able to download a schematic for an EMachine desktop computer model #T2742? It is out of warranty and was donated to our church and we need to know where to...


Hi dallasblue08,

Here's a diagram of what your looking for:

The following eMachine models share the same motherboard (and thus the same front panel layout):
T2742 T2796 T2798 T2824 T2885 D2823 T2862 T2896 T2898 T2958

284ecac.png

Hope this helps!

Mark

Jan 04, 2009 | Computers & Internet

2 Answers

Emachine T3828 power switch connection to motherboard


The "Ultra Helpful Instructions" that Emachines provide (here: http://downloads.emachines.com/userguides/8511279_eM_NG3_chassis_HW_ref_en.pdf) state that when replacing the system board, "18. Attach all cables to new system board", but fails to say where that would be for each cable.

The site below says it's a genuine Intel board in there, so, congrats on that. http://www.e4allupgraders.info/dir1/motherboards/socket478/D845GVSR.shtml

And with that, the link to the manual:
ftp://download.intel.com/support/motherboards/desktop/D845GVSR/SR_English.pdf

You're looking for the info on page 32, I believe.

See if that fixes it up. If not, post back.

Jan 03, 2009 | Intel CELERON 2.66Ghz CPU AND MOTHER BOARD...

1 Answer

Emachine t2742 I also have a wiring problem!


gtater,
It's ironic that you ask me this question today-- i am just now carrying in another eMachine computer to fix. Anyway, unfortunately I do not have one that is the same model as yours (T2742). However, I did some quick research and found that yours has the same exact motherboard as the T2898 which I made the diagram for!

The following eMachine models share the same motherboard (and thus the same front panel layout):
T2742 T2796 T2798 T2824 T2885 D2823 T2862 T2896 T2898 T2958

284ecac.png

For further reference, I would like to share this diagram for the eMachines T6544 in case someone else may need this model. This is the computer I just carried in... might as well share.
ccd6456.png
By the way, the power switch doesn't need to be oriented any particular way (positive and negative), which is why the switches are not labeled as + or -. Switches can be wired either way and they will work the same.

Hope this helps.

Jan 03, 2009 | E-Machines eMachines Desktop PC

3 Answers

Intel D845EPI/D845GVSR won't power up.


oon mobo thers pins that go to front finsd ones says pw stick it in eash way try new switch also ove rthose 2 pins ok to get itto light up could be bad mobo

Oct 07, 2008 | Intel D845EPI (INTELKD845EPILPAK10)...

5 Answers

Intel D845EPI/D845GVSR MB problem


if you can get past the POST properly and see the drive size, nothing is wrong with the drive hardware. I think XP is seeing a previous boot sector install so try first to fdisk, format and system boot the drive. This should remove any boot sector "shadows".

Dec 26, 2007 | Intel D845EPI (INTELKD845EPILPAK10)...

10 Answers

My Intel D845EPI/D845GVSR MB processor does not boot up. No BIOS or POST is dispayed on the screen


Try to use working processor from your friend, If the problem still the same possible your motherboard has been damage. Ask for a warranty for the supplier.

Don't rate me Inappropriate if you don't like my solution or rate me SOLVED if this solution solved your problem. Thanks

Nov 23, 2007 | Intel D845EPI (INTELKD845EPILPAK10)...

Not finding what you are looking for?
Intel Desktop Board D845EPIL Motherboard Logo

9,824 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

vsri9

Level 2 Expert

73 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...